Forum Replies Created
-
AuthorPosts
-
eastlmark
ModeratorRe: Smeg DI612CA Dishwasher
are you saying it runs through the pre rinse (ie the cold prewash), then empties, re fills and starts washing for 5 minutes or does it just complete the back rinse sequence ansd then starts the wash before aborting?
Allways best to test these on the quick or glass wash as it goes straight into main wash.
if its the latter then would suggest its overfilling due to pcb failure and the error code ties in with this.eastlmark
ModeratorRe: Smeg Slimline DF410s
yes, sounds like pcb. common fault on the full size ones but normaly overfill intervenes.
eastlmark
ModeratorRe: Electrolux ESL6155 no heat
dont know but 2 pressure switches shown on that model, assume one may be a heater safety.
eastlmark
ModeratorRe: GDA BF71 dishwasher no fill
micro switch jammed by blocked or faulty float in left hand panel?
eastlmark
ModeratorRe: smeg di612 code
that is a no drain error. although you can hear the pump running, is the small amount of water in the sump being drained out?
eastlmark
ModeratorRe: TA500 thermostat
loaf wrote:Connect has the TA500 replacement -42TH9/J5 , their number is 5031680284256.
if its a top line, forget it, it wont fit.
eastlmark
ModeratorRe: I hate Connects new return system
robbra wrote:I never have a problem. A ‘phone call or email and it’s picked up within a day or two. I just don’t like some of their prices.
not any more…… have to deal with them online.
eastlmark
ModeratorRe: smeg wm63141bk
its just a hose, unscrew it and fit a normal one will soon eliminate or prove the point.
eastlmark
ModeratorRe: smeg DI 612c
How do you know its not overfilling? once the fill times out it pumps out anyway. You need to tell us exactly what it is doing. Favorite is pcb failure ignoring the pressure switch.
eastlmark
ModeratorRe: Scarey Creda t/d
:zap:
eastlmark
ModeratorRe: AEG fav 88070vi 911938601 sump to pump hose
not shown on the parts list. although the manual describes it as a “rubber coupling”
eastlmark
ModeratorRe: smeg DI 612c
E2 error.
eastlmark
ModeratorRe: wf321 bearings hotpoint
according to partfinder it is welded, no screwed option for that one.
eastlmark
ModeratorRe: GPRS Credit Card terminals
Mine is on Vodaphone and coverage was patchy but they told me to reconfigure it to GSM instead of GPRS (it took 2 years of complaining before they told me this mind)and its much better and quicker that way. Still, had one customer lead me up to her bedroom the other day under the pretence that its the only place in the house where there is a signal! I dont know, the tricks these housewives try on 😆
they are not perfect though and there is no safe option of taking a card with no signal AFAIK. Still some way to go before we can ditch cheques altogether.
eastlmark
ModeratorRe: Zan/Lux main PCB change
careful Jim, 2 of these I did also needed the display board, no obvious damage but no lights or functions when turned on.
-
AuthorPosts
