eastlmark

Forum Replies Created

Viewing 15 posts - 2,176 through 2,190 (of 4,480 total)
  • Author
    Posts
  • in reply to: broken door – Sensordry APM 8620 #270952
    eastlmark
    Moderator

    Re: broken door – Sensordry APM 8620

    yep very common problem that catches a lot out as they change the door handle/hook. the actual problem is the door rim needs changing. 421307743104 is the part number, I am sure the spare parts here at UKW can oblige.

    in reply to: diplomat apm8702 not washing properly #271084
    eastlmark
    Moderator

    Re: diplomat apm8702 not washing properly

    most problems are down to the module in the rear rh bottom corner. outside chance its the timer.

    in reply to: oven temperature tester? #271036
    eastlmark
    Moderator

    Re: oven temperature tester?

    aqualectric wrote:Maplin do an infrared one at £29.95 – I’ve got one and it does the job!!
    Temperature range is -50 degrees to 280 degrees so it’s suitable for ovens and fridges. http://www.maplin.co.uk/Module.aspx?ModuleNo=46033
    Order code – N28BJ.

    Steve.

    same one as I have (use it for tyre temperatures) if you read the instructions it states it will not be accurate on a reflective surface and if pointed at glass will read the temp inside rather than on the outside.

    in reply to: oven temperature tester? #271034
    eastlmark
    Moderator

    Re: oven temperature tester?

    wont work on glass though, or stainless steel. The contactless ones need a dark, matt surface to read accuatly.

    in reply to: diplomat apm6528 #271027
    eastlmark
    Moderator

    Re: diplomat apm6528

    its a Whirlpool but no tech info on MFI disc or SIOS.

    in reply to: Vestel made machines #270979
    eastlmark
    Moderator

    Re: Vestel made machines

    I would be all for a lower spec and price Asko machine, could it be anywhere near the current Ise 5 price though… We used to retail a 1200 sans outer door at around £550. Probably a bit pricey for the average Ise 5 customer.

    in reply to: GPRS Credit Card terminals #191237
    eastlmark
    Moderator

    Re: GPRS Credit Card terminals

    pretty sure you will be guaranteed payment if authorised unless there is a dispute. (ie its a stolen card). As we are generally in customers houses at the time then that is an unlikely situation. Electron/solo cards will only pay if there is enough in the account and that will be checked at time of authorisation. Other cards depend on their overdraft limit or credit limit for credit cards.
    Whatever, its the safest way of taking payment.

    in reply to: GPRS Credit Card terminals #191235
    eastlmark
    Moderator

    Re: GPRS Credit Card terminals

    grazzamongrel wrote:just a quick question as i am very interested in getting one of the hand held terminals, if insufficient funds are in the customers account when paying for the repair does the terminal know this and reject the card??
    😕

    yes

    in reply to: ADP1107 #270740
    eastlmark
    Moderator

    Re: ADP1107

    11740380

    in reply to: Oh Smeg! The Ovens gone off again! #270234
    eastlmark
    Moderator

    Re: Oh Smeg! The Ovens gone off again!

    It does have a cooling fan fitted to the top of the oven under the hob. Its either siezed or the device that initialises it is duff. Would suggest checking you can spin the fan by hand first to establish it is not siezed. Power off if removing any panel.

    in reply to: Diplomat ADP8322 #270682
    eastlmark
    Moderator

    Re: Diplomat ADP8322

    heater element is a favorite or you may have a leak and the water has got on something causing the trip. Need to remove the bottom panel under the door, if you have a leak the tray covering the base of the machine will have water in it. Makes sure you unplug before doing anything and if the fault is not obvious, you will need a test meter to establish the cause.

    in reply to: To all Smeg Techies #270550
    eastlmark
    Moderator

    Re: To all Smeg Techies

    If its blown ie burnt out then yes look for a reason, if its just dead then its probably just the board, often the case when customers leave them switched on 24/7

    in reply to: To all Smeg Techies #270548
    eastlmark
    Moderator

    Re: To all Smeg Techies

    asssuming its got power and its not the on off switch then it will be the module. £132.08 retail price before vat.

    in reply to: water indicator on a whirlpool dishwasher #270536
    eastlmark
    Moderator

    Re: water indicator on a whirlpool dishwasher

    yes that is the part, must admit cleaning is not the best repair.

    in reply to: To all Smeg Techies #270545
    eastlmark
    Moderator

    Re: To all Smeg Techies

    need to check that model number, doesnt sound like a smeg one.

Viewing 15 posts - 2,176 through 2,190 (of 4,480 total)