Forum Replies Created
-
Posts
-
Re: miele w916 tap light coming on
then maybe its the aquastop valve gone? Be careful with Miele valves though as some are 125 volt coils. Would suggest connecting a normal fill hose to the inlet valve in the machine but you have to leave the aquastop valve connected electrically to prove if its works or not, if it then fills fine then its the aquastop valve at fault and even more £££
Re: Miele W865 Error Code
rinse light flashing is a no motor action detected fault. No re set for it as it means fault still exists. Its easy to re fit the motor brush module with the pins out of line with the contacts on the field coils so check with a meter for readings between the pins: 2 for the armature, 3 for the fields, 2 for the toc, and 2 for the tacho. If no reading on the fields then you may have not lined the pins up. If all ok down there then its the power pcb clipped to the back of the facia. some threads on here about repairing them but never done one myself.
Re: whirlpool diswhasher wash pump
no! Gone with masterpart, not too much more in the end. Already had this thing in and out 3 times and don’t want to have to do it again.
Re: whirlpool diswhasher wash pump
Thanks John, that shows part number 480140102396 but I found 480140102395 on qualtex and it looks the same and a lot cheaper, worth taking a punt?
Re: new marathon washer dryer
kwatt wrote:Beat you to it…
http://www.ukwhitegoods.co.uk/appliance … r-revealed
Yes, they did.
K.
as did many…. Philco/ Bendix comes to mind most of all.
Re: Miele Novotronic Premier 520 absolutely stumped
breathers maybe? if its one the sides come off, there is a hose from the filter to the dispenser hose and then Y pieced to the rear box. all these need to come off to be cleared. Other than that god knows!
Re: ISE 10. 1406
deltra wrote:The impeller has fallen off
ok let you off then but! bet a foreign object was involved though.
Re: rubbish non genuine dryer capacitors
Hollytree_Technical wrote:Here is the pictures of a “Last One” branded capacitor that has lasted less than 2 weeks.
Jem
mmm, fitted one on a Hoover drier some weeks back and left it running while I was writing the bill out and next thing burning smell and all sorts of bad stuff from the motor. I assumed it was a goosed motor and due to being so difficult to get too just wrote it and my newly fitted capacitor off. Maybe should have taken another look.Re: Odd place for a washing machine
good. I would have walked away too. Hope you didn’t loose out to much on the wasted trip. Hope no one else did it for them and they might just get the message.
Re: hotpoint ff4dk(uk) fridge freezer wire in door
its a heater in the door joint I believe. Think its covered by a recall.
Re: Smeg Oven Hinges and runner – S1100MFX5
don’t know where that part number came from…
685970053 rh
685970052 lh
both in stock at servevastRe: Hoover 652 and 652A parts. What have you got?
skipped all of that stuff a few years ago… about the time I skipped all my Triumph Herald spares. Had everything…. trunions, diff, modded rear transvers spring, restored wooden door cappings….. just lost interest and at the time worthless…. now no doubt priceless!
Have a couple of manuals if your interested?
Re: Japanese by name only?
nothing new in this story, Japanese had plants in China way before I think it was the norm over here.
Hope that customer has not got a British made Panasonic microwave then, she would be ourtraged.
