Forum Replies Created
-
Posts
-
Re: Diplomat 8702 Dispenser hose
maltheviking wrote:
PS how do you get the door seal, drain hole to seal to the tub on one of these, I had four attempts last time I fitted one 😕 Said I would never do another one! GREAT DESIGN :rolls:Good old fashioned debor. make sure it is lined up with the hole first, if not turn the seal until it is. plenty of debor on it, push the whole lot inside the tub and carefully pull out the outer lip hopefully leaving the inner lip inside the tub, hopefully some debor will remain on the pipe while you can spend the rest of the day picking most of the rest of it off your fingers.
Re: LG dead
BobHope wrote:hi Mark,
check the front display pcb for ingress of water/conditener had a one that locked out the ic2 bus line to the main pcb do this. if its OK its the main pcb look to see if the potted-in fuse has blown.
Bob.
and if it has?
Re: WMA Rinse aid puzzler
I have spent far too many hours puzzling over problems with comfort not going or water left. As Jim says, everything appears ok but it stubbonly wont go or leaves the compartment full of water. The one problem I have found is with the syphon cap becoming a looser fit than it should be and floating up on the water hence not starting a syphon. new cap and draw is the usual cure, would recommend the whole dispenser as well just to be sure.
the current trend of taking a double valve (Bosch, ISE to name a couple) fill on rinse with the jet being deflected does not help as it is impossible to poke through the jets from behind as we used too
Re: Complete Pump Kit from Europart-Maddocks
just a gimmick really, will use 1 or 2 types regularly and most never.
Re: What are Hotpoint playing at
The latest partfinder disc includes a data field box in which to enter this number rather than choose the model number from the drop down.
Re: AWZ541/3 Whirlpool Condenser Dryer Help !
check the pipe from the pump to the container is not bloccked. If the pump chamber is full of water then it may indicate a duff pump. just ideas really.
Re: Homepage picture
Why, I think its OK, sharp focus of the resistors with the nearer components out of focus, very artistic. Maybe your screen needs some updating Jim.
Re: NTC – what is it and what does it do?
In this trade, NTC seems to be the universal term for any electronic temp sensing device whatever its operational function., these days.
Re: White Knight CL767
Flyman wrote:If memory serves me correctly these are the Bosch models with Crosslees own brand name on and are not an easy machine to work on. :
Dont remember ever seeing a Bosch branded one of these condenser models. ❓Re: White Knight CL767
Penguin45 wrote:
eastlmark wrote:
take the front off instead.How?
Chris.Try undoing the screws. 😆
Re: Hygena dishwasher probs
Common faults on that one are blocked hoses from the sump to the air break in the rh side panel, this causes a lack of water inside, you may be able to clean these from inside the sump with the filter removed, otherwise its a removal job to do it porperly, also they suffer from wiring loom faults, not a recommended diy repair.
