Forum Replies Created
-
AuthorPosts
-
eastlmark
ModeratorRe: Hotpoint int’ fridge , gas or comp?
cleaned out the condenser and check the cooling fan is running?
eastlmark
ModeratorRe: ISE 10 washer broken knob. cosmetic damage or not?
ours, after another year of use, is showing signs of the silver coating being scratched which do appear to look like crack but are nothing more than the outer coating.
eastlmark
ModeratorRe: Bosch dishwasher free call?????
so a blown module now = a fire risk? Seen a fair few other makes with similar results……..
eastlmark
ModeratorRe: Hpt dw DWF 30P/7 (Bosch) pcb repair. Detail required.
Mike, I think I once had your enthusiasm!
eastlmark
ModeratorRe: Hpt dw DWF 30P/7 (Bosch) pcb repair. Detail required.
dont get me wrong, having come into this trade from an electronics background, all be it way back in the days of BT139 triacs or even massive thyristors paired with a massive diode, I am well versed in board repairs and will take on one if it looks like a simple failure not caused by by an unknown failure elsewhere (e.g relays, burnt out resistors etc)and I recently spent half a day (Sunday!) changing relays on a miele td heater relay board, (Double sided track is a nightmare).
But from a business point of view, how can you charge for all the time and hassle and in that respect cleaning filters all day makes much more sense. Electronics as a hobby is fine and I must admit I found the recent Miele power board fuse and relay thread interesting as I have puzzled over those no drum action faults for many years. Keep up the good work as Martin said.eastlmark
ModeratorRe: Hpt dw DWF 30P/7 (Bosch) pcb repair. Detail required.
mike, you got way too much time on your hands, one look at that board and I would suggest to the customer its BER, bound to be something caused it to go pop and IME virtualy impossible to find the problem without several expensive blow ups!
eastlmark
ModeratorRe: Merloni Smart Card Readers
Its pretty easy to use and it does come with instructions, must admit dont use it much but not had a failure as yet. On the fridges, every time I have programmed one the red “failure” light has come on but in each case it had programmed successfully. There is a second version I think and I dont think they are all compatible with the older modules. The biggest issue is that no one stocks all the smart cards, allways a special order or get direct from Indesit.
eastlmark
ModeratorRe: Dishwasher
have a manually selectable hot (65 or 70) program, not relying on auto programs only a la Bosch.
eastlmark
ModeratorRe: How do YOU pronounce it?
rolf wrote:Pooh is a bear as in Winnie the Pooh .
I would of thought it should be poo but I may be wrong.
Another one of lifes quandaries.
Poo or Pooh :con:A Scotsman confusing an Englishman? Now theres a thing!
off topic, anyone see “the Scheme” last night? Sure would not like to be the Kilmarnock engineer who has to visit that estate!eastlmark
ModeratorRe: Smeg D/Washer, dead.
£75 having a laugh comes to mind!
sounds like the rubber rings may be from the push buttons, the pcb’s do come loose in those things if pressed to hard.eastlmark
ModeratorRe: Smeg D/Washer, dead.
pcb, you should always get at least some lights showing. That one though has seperate pcb’s for the lights/display which could be the problem. Obvioulsy a ribbon cable connects to the main pcb and it is possible to fit this back to front, has anyone else looked at it before you? Just a thought.
If the main pcb is blown, I always quote for all the boards as I have been caught out too many times with a working machine with no lights showing.main pcb 696290758
display pcb 811650317
key pad pcb 811650311eastlmark
ModeratorRe: How do YOU pronounce it?
funkyboogy wrote:well i know how i would pronounce some of them martin
it begins with P and ends in H..
LOL ally
I know I am a bit slow, but just spent a whole weekend with this one and still dont get it…….. :haier:
eastlmark
ModeratorRe: A real case of SWAN’ upping!
are the CAB paying you then Martin?
eastlmark
ModeratorRe: electrolux EMX14440W goes to pause on all programmes
Martin114 wrote:Earth leakage on dryer element maybe.
or wash element, megger the dryer element hot as often the leak wont show up cold.eastlmark
ModeratorRe: Servast
pretty much up to date, had their end of year accounting period on the last day of April which may explain any late payments.
Portal getting better by the day it would seem, just wish you could build a spares order rather than having to order every little item immediatly before it gets lost when you (or it) logs off. -
AuthorPosts
