Forum Replies Created
-
AuthorPosts
-
eastlmark
ModeratorRe: Smeg Washing Machine. Model WM63141BK
loose tacho magnet? or check for a circuit through the tacho coil, will be a new motor if open circuit. PCB otherwise I would guess.
eastlmark
ModeratorRe: bosch cond drier lower flap problem
loopey wrote:the push button is stuck open its behind the door …. hth
phil
thanks but can you elaborate? the button that releases it seems to be working ok
eastlmark
ModeratorRe: Bosch FD8610 washing machine stops filling
you have told us it was made in OCtober 2006 but little else! Model number would be a help!
eastlmark
ModeratorRe: NEFF fan assisted oven DB1451
19 months! thats an endurance record!
eastlmark
ModeratorRe: Ton of silicone for a few quid? In Pontefract.
I bought a bulk load of silicon from a reputable wholesaler a few years back and after using around 2 tubes, the rest were set solid in the tubes before they were even opened. They were stored in my garage at home and subject to the worse a British summer could throw at them (lets face it, not great extremes of heat!) and yet they ended up in the skip.
This lot was listed as mixed colours and IME only clear will do in our trade.eastlmark
ModeratorRe: RUNNING A DOMESTIC APPLIANCE BUSINESS FROM HOME
You do surprise me. there has been a complete shift in working from home atitudes since 1992 and I cannot believe any council would take exception to anyone do so, assuming they are not causing a nusiance to other residents.
Must admit though I have never taken a machine away to repair for 25 years and even then I would be struggelling to think of an occacsion.eastlmark
ModeratorRe: Miele PW5065 Poor Spin Performance
not sure about this model but a regular on other Miele’s is the pipe from the Y join on the dispenser hose down to the top of the filter. Take the side panel off and you can see it easily, take all the pipes off and flush them out.
eastlmark
ModeratorRe: hotpoint “dryness” module
funny enough its just been added to my connect order today, lets hope its in the box when it arrives on Tuesday. Qualtex now also showing it in stock, obviously a shed load have just turned up.
eastlmark
ModeratorRe: Maytag TD40
asko part numbers are:
8061815 outer door seal
8061814 inner door seal
if thats any helpeastlmark
ModeratorRe: smeg A2-2
op part number is now replaced by 818730567 IMO you probably need the correct one for these.
eastlmark
ModeratorRe: I’ve an idea!!!!!!
always bothers me that connect switched to online statements to save postage yet the junk mail still arrived x2 (to both my delivery adress and my account address.
eastlmark
ModeratorRe: Whirlpool adp6830 owi removal
OWI? :con:
eastlmark
ModeratorRe: indesit d66s dw door seal
I think that is the correct one, not done one for a while but the original is sandwiched between the stainless and is impossible to fit. Cannot remember how but it didnt take long to work out.
eastlmark
ModeratorRe: FIGHT….!!!!
and then Jeremy beadle appeared!
oh, forgot he died!
-
AuthorPosts
