Forum Replies Created
-
Posts
-
Re: Hydroclean wet dry
looked up hydroclean on our main wholesaler
cannot confirm it will fit as the sites hide models to stop info theft. you could ask the site shop to see if they can confirm it may fit and if they can supply
filter is mainly for Electrolux masterlux series
part number QUAFIL150
Dave
Re: BUSH DISH WASHER WQP8-9347
has this machine got any kind of child lock feature that may have been activated by mistake ?
Dave
Re: E4 Error on Dish Washer
are you sure the door switch is operating correctly
plus you may now have the wires on the overflow switch on the wrong terminals
to make things worse there is little or no tech information on these machines as as far as i know the brand is owned by Argos. which means i cant find out where the wires go
as a rule these days take a quick pic on your phone before you disconnect anything
plus also please you the original thread to continue your problem when its the same appliance as i had to find your old post to find out the original problem
Dave
Re: short circuit Hotpoint LSTB400 UK
no internal fuse I am afraid
sounds like you have messed up the pcb
Dave
Re: bosch waa24171gb/12
maybe post444679.html?hilit=reset#p444679
or
post443461.html?hilit=reset#p443461
dave
Re: bosch wvd24520
see item 0421 has to be put in from the inside
not done one as customers did not like price plus you have to quote for seals as well in case they leak when you re-assemble
scrapped a few of these when the same part from the condenser hose came out and machine leaked.
great machine but this is a bad design as rubber hoses will go over timeDave
Re: HJA5100 Wiring Diagram
by the look of it just look for the connector blocks as you will find what been changed
Dave
Re: Maytag MWA09149WH showing F22 error
hotpoint used to do this when brushes were open circuit
dave
Re: BEKO WM74165W Washing Machine wont start
door lock would be the first thing I would check. could be mechanical ( door not closing properly) or electrical (door lock faulty or no power to it)
Dave
Re: Confusion using advanced search
seems from what I can see you are the only person searching for this model
one way of using search is to use wild characters. In most cases the problems have may have been encountered by someone else but unless one batch is flawed it will be under a different model. my way of dealing with this is to take a few letters off the model and add *
in your case search for N21H40N0GB* will bring up only your post but you can remove the GB as well to see if other post have similar numbers. The wild character also means if you don’t know complete model you can still find posts
I would remove the draw unit first and make sure both runners are going all the way backhope it helps
Dave
