[electrofix]

Re: blomberg CFF311 fridge freezer temp

cant see a lot of info on this one

first you may have model wrong I can see CFFN311

if so your unit is a non frost free and I think the stat in the fridge controls everything ( others members may have more knowledge)

does the motor seem to be running all the time ?

if yes then you have a compressor or gas problem. either way its a professional only repair and may not be worth it if the compressor has failed

Dave

[electrofix]

Re: Asko washing machine questions

chances are there other ones that will fit but

cant find you model but the brushes i found are described as switch off. From that i summarize they contain a device with a spring that pops out when brushes are too short to save damaging the motor. so if yours have failed there will be a plastic dimple popped out of the head of the brush. Also if your brushes have failed you will either find a pop out or the brush face will be dull and pitted where it has been sparking

Dave

you can look in site shop for FHP brushes

[electrofix]

Re: HOTPOINT HUE 61XS heating issue

if the oven is heating and not overheating then it sound like all you have is an indicator light problem

if you had a stat problem it would be too hot or too cold

Dave

[electrofix]

Re: lux oven lamp

thanks

customer decided not to try changing lamp holder so had to give up

could not see any reason why it would blow the bulb and now may never know

Dave

[electrofix]

Re: Russell Hobbs t/d

rang product care

seems this machine is made by Galanz

did internet seach and up popped an invoice for spares from the manufacturer to a firm in Bolton Called G2S
http://www.g2sltd.com/

I would ring them and ask

Dave

[electrofix]

Re: Lamona dishwasher

! which light
2 why did you hold the buttons ?
3 if you set a wash from the beginning what happens ?

Dave

[electrofix]

Re: Dishwasher quandary

Bosch are not as good as they were but still better than the Hotpoint and indesit
plus it carries a 2 year guarantee
still fit Bosch machines if given the choice

Dave

[electrofix]

Re: Miele KM5953

post a very good picture of the board component side and i will see if anything jumps out

Dave

[electrofix]

Re: Lamona dishwasher

if you post the error code you have someone may be able to help

Dave

[electrofix]

Re: Candy Oven problem

to be honest it does not look too bad but you cant always tell from a picture

if you have access to a multimeter you should get under 100 ohms across the element if its ok

does the fan turn easily

would hate to think you have jumped the gun and you problem is the clock (if fitted)

Dave

[electrofix]

Re: Dishwasher quandary

well all we can say is its easier to get the spares when they fail. And expect to be on first name terms with the engineers lol

Dave

[electrofix]

Re: Candy Oven problem

this looks like an F series oven where the element loads from the back. what worries me is you say you have no fan. if the element fails then the fan in the middle of the element still works.
your crumbling plastic is common on this model and you may have to squeeze the terminals to get them tighter
if you do need to change the element use the gen one as the non gens don’t fit properly or last as long

Dave

[electrofix]

Re: Russell Hobbs t/d

oops did not notice he was trade. yes we know better than that.
see quite a few of these and struggle with spares. some appliances seem to be made by vestel but cant vouch for any of them

Dave

[electrofix]

Re: Dishwasher quandary

russell hobbs is worse dont ever buy it

not seen or heard anything about the sharp but it is a well known make

dave

[electrofix]

Re: Bosch Washing Machine WAQ284619B/12 Error Code E:34

just as a long shot i take it the lock you fitted matched the part number martin posted above

Dave

[Author]

Posts