[electrofix]

Re: bosch cooker hinges

sounds like the socket is faulty also

from what I can think anywhere you remove material is going to make it worse

dave

[electrofix]

Re: Hoover hnl842

why did you change the pump?

if the old pump was rusty and the coil had gone it will have blown the traic on the board. also tends to blow the 2 resistors that trigger it
can be fixed by pinching part from an old board but there is a chance the main processor has been damaged as well, in which case new board only

Dave

[electrofix]

Re: Hotpoint HULT 943 – door doesn’t open

how does the door handle feel

does it seem to be stuck or does it pull all the way out but the door still does not open ?

Dave

[electrofix]

Re: WMFUG742PUK pressure switch reset or software

have you looked at the top of this forum ??

hotpoint-indesit-pressure-switch-reset-t69601.html

Dave

[electrofix]

Re: aeg tumble dryer no display 916096397/04

try here

http://www.qer.biz/servReps.htm

Dave

[electrofix]

Re: New Kitchen, New Fridge / Freezer

the john lewis brand is supplied by Electrolux but they own Zanussi, Aeg and Tricity Bendix so this unit may be supplied under any of those brand names

Dave

[electrofix]

Re: recall related hysteria

but has not the industry brought some of this on itself but ignoring build quality in search of the quick profit

Dave

[electrofix]

Re: John Lewis JLDWW1223 Dishwasher Fill fault

have sent you a few docs

Dave

[electrofix]

Re: iwdc6105

have you checked dryer element for failure ?

Dave

[electrofix]

Re: aeg tumble dryer no display 916096397/04

sound like a main pcb problem. if you have any electronics knowledge first check is the board power supply

Dave

[electrofix]

Re: saga of a candy GO FS 262-80 help required

take the brushes off and make sure the are long enough. new brushes stick out about an inch but can work till they get to about quarter inch

you also put in your original post
“i understand this to be a blocked line or pump failure -“

have you checked the pump ?

Dave

[electrofix]

Re: saga of a candy GO FS 262-80 help required

have you checked the motor?

if motor is out of circuit such as brush failure. loose socket ( may have moved it when you did the heater ) some machine react like this

Dave

[electrofix]

Re: saga of a candy GO FS 262-80 help required

when you say it operates to a point which point ?

does door lock
does it fill
does the drum turn etc

Dave

[electrofix]

Re: saga of a candy GO FS 262-80 help required

they will fail continuity test as they are capacitors and the black is prob just dirt attracted by the 400 volt dc charge. the other component is a diode. since these components are part of the board power supply the board would be completely dead if they had failed

Dave

[electrofix]

Re: White knight – 96AW DEAD

this sounds like a board fault

need to see the board to say more

if you want to post some pics of both sides of the main board will take a look

Dave

[Author]

Posts