[electrofix]

Re: Lamona dishwasher wiring

black is neutral

will try to pm you the diag

Dave

[electrofix]

Re: Trinity Bendix cooker – si222 – hobs not working

you post does not read well its a bit confusing

if you are saying 3 ring on the hob are not working then

first thing to check is term block as some blocks have links in and installers don’t always get them tight

Dave

[electrofix]

Re: Hotpoint CH60EKKS

there are 2 problems here

1 it went pop
2 the fan is running

the first one caused the second one.
you will probably find a welded contact in the switch behind the knob. what you have to do is search for the short that caused it

Dave

[electrofix]

Re: Neff B1644N0GB/03 all heating elements not working

had this fault before on another oven. its only there so they can have it powered up in a public display. some washing machine have it as well

glad you got it sorted

Dave

[electrofix]

Re: Ignis AKL 828 ix door glass ?

a lot of inner door glasses are just glued in

yes you can get high temp silicone to glue it back.

pay close attention to cleaning it before you glue it otherwise it will not take

cant see it in the site shop but am sure they can source for you. email them

Dave

[electrofix]

Re: Zanussi ZBM799X Door Removal

yes put a picture up of the hinge

there will be a way of locking the hinge to take the door off. a lot of them is a flip up piece of metal that jams it so when you lift the door it unhooks

Dave

[electrofix]

Re: Neff B1644N0GB/03 all heating elements not working

that may be nothing. depends how they switch the displays

anyway spare parts listing here

http://www.neff.co.uk/store/

could be main board item 0511 page 5
switch item 0532 page 5
long shot thermal limiter item 0503 page 5

I would take the main board out and look for blown tracks. it could also be one of the relay blown on the main board is fixable if you can find out which one and source a replacement and solder it in

Dave

[electrofix]

Re: overheated circuit board rangemaster

is it black and burnt or just dust ?

Dave

[electrofix]

Re: Neff B1644N0GB/03 all heating elements not working

poss demo mode

.Turn the function selector from Large grill to Small grill and back again five times.
? Demo OFF must appear on the display

see manual page 48

Dave

[electrofix]

Re: overheated circuit board rangemaster

this worries me a bit as there is not enough power flowing through a thermistor or a flow meter to overheat ever

Dave

[electrofix]

Re: Hotpoint washing machine less than one year old

one of the things I had in mind.
had one the other week got me to order a seal only to find out it was the tumble dryer air inlet oops lol

Dave

[electrofix]

Re: Bosch Logixx8 dead!

finding a module is pretty straight forward

first you need a part number

go here http://shop.bshappliancecare.com/

go for bosh parts and put in your full Enr

or try

http://www.qer.biz/servReps.htm

sound like a poss power supply problem to the board but have you checked the socket its plugged into ?

Dave

[electrofix]

Re: Hotpoint washing machine less than one year old

depends where this hole is

if its a faulty component no probs but if its user misuse then its chargeable

since we do not know where the hole is post a pic

Dave

[electrofix]

Re: zanussi zdc 37200w

1 where did you get the board from and is it pre configured ?

2 you state the model but there are 11 machine with the same model so I need the production code as there will be differences

Dave

[electrofix]

Re: Indesit DFG15B1

make sure it is a filling sound

when unit starts it will pump for a bit, then start to fill

also if the fill is very slow unit will time out and stop

Dave

[Author]

Posts