Forum Replies Created
-
AuthorPosts
-
electrofix
ModeratorRe: Zanussi ZWG7160P – DEN error?
cant find any ref to a DEN error
can fin “DEM” demo mode but to exit demo mode it says unplug from socket
Dave
electrofix
ModeratorRe: Neff bulb change causing oven to malfunction!
for a spares breakdown see here
http://www.neff-eshop.com/eshop/neff/gb … earch1.htm
also you model is U1322S0GB/01 not U1322SOGB/01
i would check selector switch first. there also seem to be a temp limiter stat part ident 0503 on diagram 5 this might have blown
Dave
electrofix
ModeratorRe: Beko condenser dryer
pm’ed you a few bits
Dave
electrofix
ModeratorRe: AEG dishwasher module setup?
checked part number of configured board
97391123 49 97-00 / 6have pm’ed you manuals
Dave
electrofix
ModeratorRe: Whirlpool ADP7409 851156115892 Fault F6
dont know where main prog is on this model but if its in the door have you checked for broken wires ?
Dave
electrofix
ModeratorRe: Bosch no final rinse or stuck in cycle??
part number 263185
for part breakdown go here
http://www.bosch-home.co.uk/store/spareparts/searchsound likely but its a suck it and see type of fault
also check wiring as it goes into door. a lot of dishwashrs break at this point
Dave
electrofix
ModeratorRe: AEG clock wiring
no probs m8 any time
glad you got it sorted
Dave
electrofix
ModeratorRe: Whirlpool AWOE9140 dead.
you have to find the board power supply and see if you have got an output voltage.
if yes or if the voltage goes on and off its scrap new board need. if no power the board may be fixableDave
electrofix
ModeratorRe: AEG clock wiring
i see it look at figure 15 on the pm i sent you
live goes to the other relay
Dave
electrofix
ModeratorRe: AEG clock wiring
from what i can see nothing has changed apart from the fact clock 2 has 2 relays whereas clock 1 has the place for the relay but its not fitted
from what i can see the second relay is for a fan
sent you a pm
Dave
electrofix
ModeratorRe: dishwasher tripping fuse box
you say you have just bought it. if it from a dealer or new send it back
am assuming the unit is tripping the rcd if so
most likely faults will be heater or a leak
Dave
electrofix
ModeratorRe: AEG grill element ceramic socket.
weird they are showing stock is australia
http://shop.electrolux.com.au/Model/8996611813107
Dave
electrofix
ModeratorRe: Hotpoint FFFL2000 fridge/freezer – fridge not cooling
have you measured the temp in the freezer to see if its beow -18
Dave
electrofix
ModeratorRe: KENWOOD KDW60S12 possibly fault. not sure.
this unit is a cheap chinese import and has many problem due to poor build quality
with this problem i would check the programme select button is not sticking causing it to roll through programmesDave
electrofix
ModeratorRe: smeg uk80mfx1 unusual power problem.
from what i can see looks a lot like this from site shop
http://shop.ukwhitegoods.co.uk/ele4220- … -connector
Dave
-
AuthorPosts
