Forum Replies Created
-
Posts
-
Re: Necht Oven Elements
cant find that model
butfirst email site shop
second try elementman.co.ukdave
Re: AWO/D5526 Dead
is the old module totally dead as well ?
would not be the first time i got faulty module from connect. the one i had had been damaged by someone else and returned to connect who just put it back in stock
Dave
Re: WHIRLPOOL ADG7470/1 dishwasher, no heat.
when you test dishwasher listen for the detergent draw opening it will only heat after that
if main timer pcb is in the door on your machine check for broken wires in the door
Dave
Re: Hoover DDY062-80 (32000621)
1 what is wrong with the module (describe fault)
2 if you search connect 2 modules come up including this one
5045178361220
to make sure contact connect and let them ident part so if thay get it wrong you can return it
Dave
Re: All makes repaired ?
will look at anything and always have. you only gain experience by looking and most machines work on similar principles. if you cant do it say so and walk away most customers respect honesty.
miele is top of the range, parts can be expensive but not too bad to maintain
bush is vestel turkish rubbish. spares can be a problem
lg seen a few cant repair panels when they fail as the encapsulate them but most likley problems is pump failure
Panasonic only seen 1 up to now and it was brush failure
beko not too bad but they are getting more common but have acces to tech on them
DaveRe: beko wm8063cw
motor part no
2828010500
thats a weird looking motor not seen one of those yet
checked Qualtex they have stock but it just over £100 + vat trade
Dave
be careful if motor has blown, it is a 3 phase unit, and dependant on failure may have damaged pcb
Re: beko wm8063cw
machine exists
if i knew what you wanted for it i would give you part numbers
dave
Re: Cannon C60ETX
dont know this unit but reading your description and reading between the lines
you say the oven element stays on, have you checked the relay that controls the element to see if its short circuit
f01 may be element relay short circuit
its worth a checkDave
Re: Lamona HJA 3220 not fully heating
you may have the model wrong but from what you describe it sounds like the following
the oven you have is a convection oven so has no fan. when the oven is working they use the grill element plus another small element under the floor of the oven
if the floor element fails the oven fails to get to temp as it lacks powerDave
Re: Bosch HBM43B150B Hinge snapped shut
see if this post helps
post415586.html?hilit=oven hinge#p415586
Dave
Re: Miele t8966 WP Dryer
most condenser dryers have the water container at the top and the water has to be pumped up from the condenser. when the water condenses it falls into a tank, this tank has a float or sensor to detect when its full. if this tank becomes clogged with fluff or the pipe to the draw becomes clogged it does not drain properly and give a full draw signal when its empty
Dave
Re: Zanussi dishwasher ZDF14001SA overfilling
at 8 months old he should be calling the manufacturer under guarentee
Dave
