[electrofix]

Re: Smeg DWI612C

first one is simple. its the power supply of the pcb thats failing.

As the unit starts more and more things turn on valves,motor,heaters etc requiring more and more power. As there is not enough power to supply all these the computer on the board crashes and it resets and starts again

not a hard job for a qualified engineer that frequents the trade side of this forum

Dave

[electrofix]

Re: Smeg SE375MFX5 Oven – faulty selector?

from
http://www.servevastdirect.co.uk
they list it as

ser00072674

dont know proper smeg part number as they disguise it

Dave

[electrofix]

Re: LG direct drive F1247TD

may be a pump problem. on some lg machines there are 2 pumps yours included

one pump drains the water but the other one circulates the water and rains it on the washing.

get a torch. start machine with no washing or soap powder.
watch through the door glass. you are looking for a jet of water normally from the top of the door rubber. if your buzz is only there when this motor is running the its a pump problem

Dave

[electrofix]

Re: Where can i find out how to do this?

describe the fault with your oven ie is it getting too hot and burning things

can you check model and give me the pnc number ( 9 digit number plus 2 more sometimes )

give us a link to the part on this site you are looking at

Dave

[electrofix]

Re: cda cw496/1

the capacitors are either 1uF or 1.5uF normally they are not polarised ( working on ac )

if you find the value will tell you part no etc

supplers are either rs components or Farnell

Dave

if you want to post a picture up of the board can point components out to you if its configered that way

[electrofix]

Re: Diplomat ADP5520 Range cooker – Main Oven

you have blown a fuse and as susch all sorts of things can blow

you said you checked the clock but have you checked the power is coming out of it going to the main oven switches

take out oven selector switch and look at the contacts see if one of the has blown

lastly check thermostat for continuity

hope it helps

Dave

[electrofix]

Re: Asber LAB-1200 DD UK Glasswasher Element

took a bit to find them but asber is part of Fagor

http://www.asberprofessional.com/en/

here is the main site send them an email and ask them for spare parts suppliers in the uk

Dave

[electrofix]

Re: cda cw496/1

if you look at the pictures in the pcb faults section it will give you an idea but part will be on the main pcb normally in the door

Dave

[electrofix]

Re: cda cw496/1

so lets get it straight in my brain

you select a programme and it pumps then fills

as its filling main motor starts and stops and starts and stops

is this about right

possible timer power supply capacitor not sure if this model has one but its worth swopping if it has one

see

trade-technical/simple-pcb-repair-tips-t51155.html

for post made by myself and others

Dave

[electrofix]

Re: commercial dishwasher

http://www.easicook.co.uk/DEXION/dexion … eparts.pdf

most commercial dishwashers have 2 heaters. one in the rinse boiler item 230083 and one in the wash tank 456015

the rinse boiler heats first and after its up to temp the stat 236043 switches on the tank heater. this continues to heat until temp is reached when stat 236042 switches it off

as the current to these heaters is quite large the stats do not directly control the heaters but switch contactors which are mounted in the top ( there are 4 of them 2 will be for the heaters )

since your fault is no heat you need to concentrate on the rinse tank as the wash tank heater will not work till this is up to temp. check contactor, heater and thermostats. there is also an overheat stat item 236039 check for closed circuit

hope this helps

Dave

[electrofix]

Re: neb oven lower element

try the site shop they seem to list neb spares

Dave

[electrofix]

Re: Diplomat ADP8322

from what you say sounds like the motor. when these fail they can make a grumbling noise. sometimes they will start if you open and close the door a few times but its wear anr tear so needs to be replaced.
these are very good units and dont cause a lot of problems and far outlasts the modern hotpoint (junk) etc

Dave

[electrofix]

Re: White Knight ECO86A Gas Dryer – Loud BUZZING!

sound like it may be the gas valve to me

but i would give WK a call and see what they say.

Dave

[electrofix]

Re: Beko WM 8127 suspension leg problem

the leg is a shock absorber
it should be stiff but able to move. if its too free the machine will bounce and may be responsible for you pin failure

Dave

[electrofix]

Re: Beko WM 8127 suspension leg problem

new pin

part number 2817050100 lower pin to chassis

part number 2801430200 upper pin

email site shop to see if they can supply

Dave

[Author]

Posts