Forum Replies Created
-
Posts
-
Re: Hotpoint WM inner drum required.
any of the wm drums will fit even the 95 series drum will fit but its got a bigger lip at the front so takes less washing
if you get stuck can find you one but you will have to come for it but am only in liverpool by the docks
Dave
Re: Blomberg 1501AAA control PCB
if i remember the blomberg door lock is directly below the soap draw it gets wet and blows up taking pcb tracks with it
you have repaired the track but the door lock may still be faulty. you will need to look at which tracks have blown and see if they connect with the door lockDave
dont forget to unplug first
Re: Most expensive repairs.
would not like to see the price of spares
you can but a terraced house for that price
Dave
Re: Whirlpool ADG 450 Slimline Dishwasher
maybe. Not looked at what malin has got in that line lately got my last ones from farnell it was identical to original so soldered in with no probs
had a quick look at maplin cant find anything that would do
go to farnell.co.uk
look at pt no 111-2848 1u5 or 111-2847 1u
Dave
Re: Most expensive repairs.
time to get a new cleaner i think lol
just looked at prices of new ones wow must be good at that price
Dave
Re: Whirlpool ADG 450 Slimline Dishwasher
if i am right there will be a capacitor on the board normally either grey or blue in colour. looks like an oblong block with 2 wire soldered into the board
if you look at the side of it there will be writing
275v or more plus a value in microfarads they are normally either 1uF or 1.5uFif you cant find it post good picture of the component side of the board and i will spot it for you
Dave
Re: Creda – D120 double oven
i suppose element may have been a bit out since it was made not a fault i have noticed or been asked about by clients
bosch oven is a smaller cavity so less room to heat up which may account for a quicker heat up time on a smaller element
thanks for posting results helps us all learn
Dave
Re: Whirlpool ADG 450 Slimline Dishwasher
its the programmer or more specifically the power supply to the programmer. its not uncommon and happens with age.
its a component on the printed circuit board inside the programmer to fix yourself you would have to confident in removing and replacing soldered electronic components
if you cant do it yourself if you find an engineer through this site i will help him or post the board to me
Dave
Re: AEG Competence B2100 advice please 🙂
fan timer is a little blue unit with 4 wire coming out of it
part number 3872079029main oven element gen part number
8996619136303go to site store and put these numbersin and you will get some pictures
Dave
Re: samsung J1453 soap draw housing
even before i opened this thread i knew it was going to be a leak
change the outer housing
dont know what goes wrong with them but changed a few and it cures it ( every time i have done it anyway )
DaveRe: zanussi f1203w auto
since nobody has replied to you
if you want the service info let me have your email address
Dave
Re: Creda – D120 double oven
i assume since you mention the fan it is the main oven you suspect as being faulty
in my opinion there is nothing wrong with it 10 mins is quite a short time to get everything in the oven to 200 degrees.
elements normally either work or they dont so it cant be that.
I assume the light stays on till it reaches temp so the stats ok.
why were you called to this? was this the fault they were complaining about ?Dave
Re: Beko WM5140W
if they want to film it breaking down they wont have to wait too long lol
any idea what they had in mind?
have sold a microwave to a film set locally took all the working parts out just left a case and got £20 for it.
good deal in my books
DaveRe: samsung BF641 fb xeu pcb
all parts seem to be bought on their own so no instructions as far as i can see. was hoping samsung website might have more but i dont have access ( how do you get access?)
parts are 2 wiring harnesses and a top bracket, whatever thats for i dont know, but they are all special orderthanks for checking
Dave
