[electrofix]

Re: Re Birth of a fridgidaire fridge

made in the days when made in britain meant something

and did not mean made abroad and we added the last screw

Dave

[electrofix]

Re: Dyson DC05 burning smell, smoke, low noise, loss of suct

it does sound like your motor has gone you need to find a local repairer who will give you an estimate for repair

you have then to look at the cleaner and all its hoses and brushes etc and work out if it is viable or not. if you change motor you will have a good cleaner provided all the accessories are ok
as for new i like the numatic but its a bagged cleaner. they make a pink one now called a Hetty for around £100.
if you want bagless their is really only dyson or cheap rubbish

Dave

[electrofix]

Re: Zanussi ZWF1440W in a spin

take it you have checked for any blockages in pressure circuit
the fault is actually a disagreement between the old type pressure switch and the new digital type (ie one say full the other says empty)
if you are just selecting spin it may not occur try selecting a rinse and spin if you are not already

Dave

[electrofix]

Re: Zanussi cooker ZKC6020w pnc 948522181

what makes me think here is it blew an rcd the switch cant do this (unless it melts) it could blow a mcb (ie short circuit)

think the ring may have an intermittent short
only thing that can weld contacts it very high current

hope it helps

Dave

Dave

[electrofix]

Re: maidaid/sammic c350 problem

it is prob a small leak underneath that dripping slowly and only shows when water builds up
or does it only leak when you start using it ?

to find leak you would have to take the front off and look with a torch ( power off )
as for being plumbed in, it would have to be removed to fix and the pipes are normally flexible

Dave

[electrofix]

Re: beko dryer

what the betting the condensor has come loose

the red lock for the condensor pushes a microswitch. machine will not operate unless locked home

Dave

[electrofix]

Re: Hotpoint BWD129 – energising drying solenoid all of the

try ringing EMW and ask if the board you have may have a leaky triac ( i have had board pass their test and end up being faulty ) or will they give you a different board if you send yours back

also take it you checked for earth faults. std valves pull about 5 watts which is just over 20 mA to earth. ie wont blow rcd

Dave

[electrofix]

Re: Hotpoint BWD129 – energising drying solenoid all of the

have you checked the voltage reaching the valve

sounds like a triac fault on the pcb.
since a valve does not need a lot of power a leaking triac will allow just enough power to open valve. normal voltage is 240 but commonly 110v if you get leakage

Dave

[electrofix]

Re: SIE531TCC

part number

311 16 54 01 /2

listed obsolete by qualtex

only main oven stat listed connect

Dave

[electrofix]

Re: Baumatic BDW2W Integrated dish washer

ring baumatic

last no i have for them is

01235 437244

Dave

[electrofix]

Re: Woolite Horror

so these are the sort of sites you visit in your spare time

lol

Dave

[electrofix]

Re: Dispenser door for Hotpoint BWM129

had a look around all i can suggest is you contact hotpoint. its not listed on their site but if you can get a part number you can search elsewhere

website hotpoint.co.uk

as for fitting could not be easier the pin the draw hinges on comes out form the top. the hardest part is taking the machine out to remove the lid

Dave

[electrofix]

Re: centurion CE50W

did a quick google search

try empirespares.co.uk

i know they do cooker spares and they sell centurion cookers so they may do the spares

Dave

[electrofix]

Re: Stock availability from certain supplier.

have you looked at appliancesonline.co.uk

they are not trade but prices are reasonable

Dave

[electrofix]

Re: Fridge freezer problem in Malta

i do not know fridges that well mostly do washing machines etc but if you look up a member called R600a he has a lot of knowledge with samsung fridges and may be able to help

Dave

[Author]

Posts