Forum Replies Created
-
AuthorPosts
-
electrofix
Moderatorthere is a door lock at the top
Dave
electrofix
Moderatorwell cant get a lot of info but one fault
F5E2 is a door lock fault so worth looking atDave
electrofix
Moderatorthat makes more sense
model is HBWD 8514DC-80 not HBWD 8DC DC-80 as you have above
no mention of any problems in tech
Dave
electrofix
Moderatorwhat i need to see is which connecter and pin these resistors feed
pics cant be enlarged enough to see everthing and i cant see the orientation of the board
Dave
electrofix
Moderatordont trust connect go to the source
Showing parts and accessories for 91460581800 | Model L76685NWD | AEG UK
its listing a valve with a flow meter and wiring diagram shows a flow meter as well
Dave
electrofix
Moderatoram not getting that model
can you check model and list commercial code
Dave
electrofix
Moderatorleisure has been part of Beko since 2002
spares info still available just got to click the correct link on web page
scroll down to heading genuine spare parts and click link “please click here”
https://www.rangemaster.co.uk/contact-support/service-spares
Dave
December 13, 2022 at 10:46 pm in reply to: Samsung Ecobubble WD80J6410AW drum paddle replacement #484853electrofix
Moderatorsome machines it can be got through the sump hose
Dave
electrofix
ModeratorI get P030079
which links to this one
https://shop.ukwhitegoods.co.uk/a097268-rangemaster-range-cooker-oven-timer
Dave
electrofix
Moderatorhoover dont make dishwashers they buy them in
[USER=”125″]don[/USER]
more up your streetDave
electrofix
Moderatorthis is a long shot
fault seems to be coming and going
common fault on some dishwashers is the wires that go between the door and the base. these can break and then make and break as the door opens and close
check these wires but do it carefully as there may be multiple wires the same colour and you dont want to mix them up if they are brokenDave
electrofix
Moderatorofficial figure is 32.15K so close enough
Dave
electrofix
ModeratorSWERV wrote:Thanks.
Other than checking the wiring to the pressure switch, it could be a board fault.or the pressure switch
Dave
electrofix
Moderatori44 is
and
MCF = Machine Configuration File
Dave
electrofix
Moderatorfound this if useful
Dave
-
AuthorPosts
