Forum Replies Created
-
Posts
-
cant find any clear pics of the panel
where are there resistors and what do they do ?
maybe you can host a pic on another site so i can see where they are on the board
Dave
when you get the error open the door and check water level. plus check for foam
was wondering if the water load was too small for some reason
Dave
get a part no 15102000 for the motor
this get a hit on that part no but does not mention Baumatic
https://shop.ukwhitegoods.co.uk/1510…hood-fan-motor
if you want to order you need to ask compatability for your unit
Dave
valve is possible
on a lot of machines they fire both valves to get it in the fabric conditioner draw. if one valve is slow it may knock the flow out
Dave
on the boiler inside there will be thermostats and also a device called a microtemp like this
https://www.amazon.co.uk/Thermal-192{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}C2{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}B0C-Temperature-Cutoff-250VAC/dp/B00XWDTENG/ref=asc_df_B00XWDTENG/?tag=googshopuk-21&linkCode=df0&hvadid=606635923907&hvpos=&hvnetw=g&hvrand=483337067262801815&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9046537&hvtargid=pla-1879290932140&psc=1
but you must get the correct temperature as its a safety deviceor if your lucky a manuak resettable stat
sometimes these things just go over time other times something has overheated and the device has done its job and stopped a melt down
you just have to strip it to find out
Dave
having no water in an iron wont cause it to fail as they are designed to be used until water runs out
ok is there any lights on the unit at all or is it totally dead ?
Dave
thats an odd fault because all the systems and controls would have already been used so there is no reason it should fail
cant think of anything that will cause it to fail at this point. The only added thing in this part of the cycle is it adds rinse aid if you use it, but , it would not stop the cycle
Dave
makes sense now I see your stateside
even if you fit the pump you have it wont last long. they fail because the rotor catches the casing and stops the motor starting
Dave
no on those dryers its a drum out job
very silly design difficult to do most repairs on those units
Dave
one of the common pumps is this onw but you need to check it will fit yours
https://shop.ukwhitegoods.co.uk/481236158434-whirlpool-others-dishwasher-motorDave
