[electrofix]

Lazy Farmer wrote:Just fitted a genuine heat pump & all seems well. Interrupted a cycle after 30mins to clouds of steam & hot water.
Thank you for your help

no probs
so the website you bought the pump from is wrong, their pump wont replace yours
its good info for us but been a lot of hassle for you

glad you got it sorted

Dave

[electrofix]

oscar123 wrote:I took advise and used AWSO only one item out of 24 out of stock..
The thing is now I have a consignment held by customs wanting commodity codes for each individual item as it was sent from France!
It took me 2 hours to do one car part in the summer.. Brexit apparently.

Have you talked to awso as have never had this problem. Did happen a while ago but had parcel 2 days ago with no problems.

the only one that did get stuck aswo resent whole shipment DHL

Dave

[electrofix]

well from the descriprion it sounds like a fill fault

check tap is on
check inlet hose for kinks

Dave

[electrofix]

got to be a voltage on the valve somewhere otherwise it would still fill when turned off at wall

Dave

[electrofix]

Oven sensor problem

Dave

[electrofix]

yes
Think Qer might still be going

Dave

[electrofix]

did it that way yesterday. checked and had no leaks so left it

if it does leak then will have to go back and fit clip but so far no probls

Dave

[electrofix]

ok thats bad news

light 1 3 and 4 give me non operative module

which probably means the main module need changeing or reprogramming

indesit only job unless you find an engineer who has paid out for the programming gear. even a new module would need programming as it comes blank

Dave

[electrofix]

would need to see a pic to know which light are on and which are not

describing does not help as i dont know what the pane looks like

Dave

[electrofix]

closest tech info i can find

may be useful
BOSCH WTW86560AU REPAIR INSTRUCTIONS Pdf Download | ManualsLib

Dave

[electrofix]

if the condensor is blocked you can see it by removing the lint filter and the secondary filer and look down with a torch. you can see the fins of the evaporator and see if they are covered with lint

Dave

[electrofix]

as professionals we use 2 or 3 main suppliers
non of them have a replacement pump for 651956. Thats part of the reason I tagged Kenn in to see if he knew because he has his pulse on spare parts due to the site shop. Also if these pumps are swoppable why does bosch not say so and why is noe motor a lot dearer

also the machine uses the motor current to detemine various things. if the motors are electrically different it wont work properly

I cant promise if you buy the correct pump it will heat but I would suspect its a possibility

Dave

[electrofix]

kaibart wrote:The installation should be checked via the manual on location etc, and if it is self cleaning the are products that bosch use to maintain the condenser, evaporator the self clean function works when there is water in the container and flushes the condenser,evaporator so I would advise checking and using the cleaning products I mentioned

good point had not thought of that. how can you self clean something with no water

thats a recipe for decreasing efficiency

Dave

[electrofix]

is it under or over 2 years ?

Dave

[electrofix]

have you got a local electrical shop
if yes take the lead off, take it down to them and ask them to fit a new plug.

yes that lead will fit but at almost £30 against a £3 plugtop. even if they charge you £20 to fit the plug your still ahead

Dave

[Author]

Posts