[electrofix]

possibly yes
i would be measuring the output voltages and input voltages of the circuit

input voltages on the input caps around 300v dc ( be careful dangerous )

out put voltages on low volt caps judging by relays will be around 12v DC

Dave

[electrofix]

[USER=”125″]don[/USER]
any views Don ?

Dave

[electrofix]

andy-uk wrote:Actually it’s still very temperamental. Is there any way to but this button panel somewhere still?

and in english this means ?

if your saying can you get the panel then it looks likely but they are about £50

Dave

[electrofix]

the timer measures the current going to the pump to determine if its empty so as the pump wears it draws more curent and upsets the balance
even though the pump seems to be running ok

Dave

[electrofix]

smeg tech can be a bit difficult but you vneed to find how the pyro is started. from what i can see it may be the clock

if any parts are needed you also need more info off the plate as there are 4 or 5 variants of this model

Dave

[electrofix]

sorted

check your email

Dave

[electrofix]

well it gets harder now

could be heater as some units only fail when hot

could be a faulty socket so try another one

does it trip when its washing or spinning
try to find out what its doing when it trips

Dave

[electrofix]

cant say fan speed as all ovens are different

you may need to chage the motor as the oil will probably fail quickly when hot

Dave

[electrofix]

check for your leak

Dave

[electrofix]

well there should be no way a multi meter doing a volt check should blow a trip when just measuring voltage

Dave

[electrofix]

multi meter should have been set on AC volts and it should not have tripped

if you need an engineer look here

https://www.ukwhitegoods.co.uk/search/find-an-appliance-engineer

Dave

[electrofix]

in that case it is most likely a fill fault

cant take you to exact part as you dont list model but on a lot of units there is a reed switch either on a little board or seperatly
(impellor jug) that counts the water in. this is the first thing I would swop and see what happens

Dave

[electrofix]

chek the fan is free to turn and runs at full speed

if that fails try changing oven stat

https://shop.ukwhitegoods.co.uk/ot117-oven-thermostat

Dave

[electrofix]

matrixresonator wrote:I’ve had a few of these with failed motors so I strip the cables to reuse on repairs, don’t think I’ve got any atm though

Qualtex has just started a pattern motor for shark cleaners

Dave

[electrofix]

is the check water light solid or flashing ?

Dave

[Author]

Posts