[expertcat]

put a u bend in the drain hose might help.

[expertcat]

I had one myself quite a few months ago and found that the wiring plug assembly with the heater wires was not pushed in correctly.

[expertcat]

look at the feet fixings they will be different size.

the samsung compressor is costing you alot of money.

Shop aroung with the samsung work providers.

[expertcat]

Bottom rhs is defrost sensor out of tolerence.

[expertcat]

the new pcb are completly made by a different company and redesigned there is only one relay which is rated at 250v to 305v.

[expertcat]

test the capacitor with a megger this will show you charge state.
Also test the diode assy with a multimeter.

You should not test hv unless you know all the pitfalls as a wrong move will either kill or blow a part of your anatomy off.

[expertcat]

has a built in fridge once levitating in mid air.

all the feet was up and still it stayed there in mid air.

After taking the draws out discovered that fitter has screwed through the cupboard and into the side to fix it in and aftwer removing these screws find that there was no refrigerant in the dam thing.

I wonder why i did a report for mfi that the customer didnt get a new one as it was only 3 weeks old.

[expertcat]

naiko try jtm contracts

[expertcat]

I tell the customer its an inspection charge.

Wins every time.

There happy to pay £40 +vat

[expertcat]

they also badly damaged ones on it as well.

went to one were the customer paiod £50 for a samsung fridge freezer.
As this unit looked as it fallen of the back of the lorry they happily dragged it through the customers house as the appliance had no feet just raw screw ends these all ripped into the customers solid wood floor.

I am called out there as the appliance doesnt stand level.
I told the customer what do you expect for £50.

Walked out the house laughing.

[expertcat]

MFI recommend fitting vt9 thermostats to there fridges now not the manufactuers thermostat.

Due to drain gully freezing up with the vt9 slightly different cut in temp.

Have not checked to see if true or not.

[expertcat]

they have brought out a new version to stop this from happening.

But they are not compatible with the older rl33 as they have changed the wiring.

Gues what last week went to one that has the problem and its one with the new type evaprater cover.

They had this problem years ago and solved it but since this unit was made in china its come back.

This will haunt them till this unit ceases to be in production.

[expertcat]

The heater can be taken off the new old and fitted to the old evaporater.

[expertcat]

Re: Expert Appliance Care

A year today.

Any eac engineers out there still making a go of it? 👿 😈 😡

[expertcat]

i would

[Author]

Posts