[Fairdeal]

Re: Candy C514 washing machine

I would go for Bosch or Zanussi.Or if you can afford miele then you cannot buy better

[Fairdeal]

Re: Hotpoint Aquarius

I persume it is WM series washing machine. Changing bearings on these are relativly easier than new models but if you have not done it before I would suggest to have it done from a professional engineer.

Simply because even if you was to put it somehow then you have to make sure it does not leak afterwards even a little.The seals are properly placed, the spider is not damaged etc etc

Sometimes the old bearings get stuck so getting them out is not easy.

Engineers charge around £80 inc parts and labour(depending on the area) so is it worth th hassle?
Please switch te appliance off beofre investigating.

Regards

[Fairdeal]

Re: Bosch SGV 4313 Anti-flood not filling

The purpose of the Anit-flood switch if activated is to drain the water out and must not take water in.

Anit-flood is at the bottom of the dishwasher.

I think you are talking about the diffrent microswitch with the red rod on left hand side.

You have to check the mehansim on these to see if something is not clogged and why the water is not comming into that chamber

Regards

[Fairdeal]

Re: TDS 2007 DVD?

Sorry Jim, They only gave me the order code which is DSTDVD2007

The only other no I could found was 5045173342477.Not sure if it is the right part no.

Regards

Omar

[Fairdeal]

Re: TDS 2007 DVD?

Well connect suppose to have delivered to me last month.

I ordered the CD on the 3rd of jan 07.Connect said I should have it on 26th and now they keep saying it is no in stock and on back order.

So not sure when would it be available

Regards

omar

[Fairdeal]

Re: Servis M9503W

Well funny enough I have supplied quite a lot of the above washer dryers.

Only reason because it is the cheapest and have not had much problem or complain from the customers.

Also Servis is giving 5 years parts gaurantee on these new W/D so you cannot go much wrong with the price you paid.

Regards

[Fairdeal]

Re: Integrated machine removal/installation?

Hi Martin,

What about the kitchen door that you have to put on the new appliance?

Normally the hinge hole are diffrent from one to the other.

Omar

[Fairdeal]

Re: Candy CDI45 slim built under D/W Fault code E4

If I remember correclty, it is to do with the water in the base

Did you check if the overflow switch was triggered?

Also are they using 3 in 1 tablets?

Please switch off when investigating

Regards

[Fairdeal]

Re: Indesit D63 stuck in cycle

Looks like it is jammed.Did you check if something is not stuck in it?

Machine will not function properly if it is not working

If you are using the dishwasher after a while then these motor become jammed.

Did you try rotating the blade from the backside of the pump(not the circulation side) to see if it moves with a screwdriver?

Finally I assume that you switch the appliance off before opening

Regards

[Fairdeal]

Re: 16th Edition, how difficult?

Well you suppose to have some electrical background.If you do then it is easy.

Because it is open book exam and multiple choice, it is not difficult to pass as compared to the inspection and testing.

You will need the BS7671 16 edition and Onsite Guide Books to pass.

Funny enough, the 17th edition is on its way by Jan 2008.

If you need more info or some material just PM me and I will see what can I do

Regards

[Fairdeal]

Re: Hotpoint WF440 – Noisy Spin

If it only makes noise at the final spin then it could be the bearings that are on their way.

Does it make sound when you turn the drum with your hand?

Bearings to go on the hotpoints is comman. they supposed to have sorted this problem out with the Wf range but it does not seems like it.

Regards

[Fairdeal]

Re: hotpoint aquarius ctd00 not rotating, making buzzing noi

The motor may be stuck and it could be making that noise.

Switch off the appliance before investigating

Regards

[Fairdeal]

Re: Hpt WD420 heater box modification 39 date code

Is the thermal cut out in wire with sheath not much easier than that of the sensor type?

I have seen that the hotpoint in their newer W/D have changed to the original sheath one themselves.

I may be wrong but I have found them really difficult to put them in.

Is it only me or someone else had same problem

Regards

[Fairdeal]

Re: Baucknecht WTI910

Thanks guys for the reply.

Do you know if I can get that tacho seperate? If so where from and how much?

Regards

Omar

[Fairdeal]

Re: *Candy* The pump keeps going on & on & on

I had to repair same machine with same problem yesterday.

Either the wire on the timer is loose or the time itself is gone.

Please switch the machine off if investigating.

Regards

[Author]

Posts