Forum Replies Created
-
Posts
-
Re: wf101 tripping
CW1 can you let us know the result from cust as it would be useful knowledge to be shared here 🙂
Re: WFK6010GB/03 FD6907
super cheers for that, itll cut down half the bits i have to go thru in the box tomorrow 🙂
Re: hotpoint washer/dryers
i wasnt around 30 years ago, so that kinda thing is all new to me 😀
but air technology could mean it shrinks the clothes, then they have little umpa loompas hanging the clothes up on mini washing lines, and then they magically expand the clothes again when dry…
Re: wf101 tripping
does it trip out IF the door is not shut???
also disconnect heater, and see if it then trips
had a couple of hp w/ds now trip out the minute you shut the door, because the dryer elements have gone down, if you start the program with door open it was fine. its almost with the first 10secs they do a zanussi and energise everything at once.
Re: indesit widl126 constantly filling emptying
no worries, if i hadnt said it, others would have 🙂
its nice to know theres still people out there happy to go to the trouble of sayign thankyou, rather than just always having a go 🙁
Re: WFK6010GB/03 FD6907
no worries, so are there actually 2 flying tags or do you know where one went to, or are both joined at the other end as well, also can you remember what type of tags the loose ends are? spade? plastic? and what size too. i only asked for a pic because it was about a fortnight ago, and ive been drunk several times since which doesnt help the ‘old’ memory 🙂
Re: which bearing kit for wf000p – 34114019 – "0151"
iadom wrote:You need to have a look at it… Big thick balance weights, 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain 30mm bearings….
my mate wont have a clue but i can get him to zap a pic of whats under the lid over to me by email. it does appear to have the older wma-type carcass, with the yellow bolt covers rather than the later ones where the bracing beam is externally mountediadom wrote:Had you put Hotpoint in the post header it would have drawn my attention more than just WF200
Had i put WF200 you would have moaned at me for giving erroneous model info
Ta, Rich
Re: which bearing kit for wf000p – 34114019 – "0151"
bump = rly need to order it tomo to come in for fri so we can do this when were over where the w/m is during the weekend 🙂
cheers in advance!
jim ?
penguin ?
Re: hotpoint washer/dryers
ah but what about these new fangled bosch/siemens with air technology, that have just come out. havent ordered one in yet to see for myself, but hoping one of the bosch guys on here can let us know unless we bump into our friendly bosch engineer sooner
Re: dyson cleaners
i use an old large wide flat head s/d where id snapped the head off it ages ago. took it to the grinder and gave it a nice fat stumpy curved edge and got rid of any burrs/edges its great now for using on vac repairs
Re: zwf16581w
is it continous pumping or does it abort/timeout after 2 minutes
what does diagnostics say for an error code ?
Re: Works For 5-10mins Then Fault Occurs Zan ZWD12270W1
laurenceuk wrote:How do I get into diagnostics please.
black tie formal dress, and shiny shoes. a limo helps, as well as being on the guestlist. otherwise you need to know the bouncer 🙂
start/pause and first button to the left/h/s. turn control knob on to the right. each click round for the first 7or8 tests a circuit function. full instructions are on connect mediator.
beware tho, diagnostics rarely show up wash heater or dryer element faults, and even meggaring can give you a false sense of security. easiest just to disconnect elements and then run it, obviously with terminals suitably isolated as we obviously dont condone live testing 🙂
Re: wf101 tripping
test run on a rinse too 🙂
so far on the latest ranges of h/p weve been called out to, all weve replaced so far has been the instant door locks, if this model has the instant door lock too id be looking there.
also, is it possible its aborting mid cycle for another reason, and then interlock trips on its release?
