happycack

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 123 total)
  • Author
    Posts
  • in reply to: ‘You Have Mail’ or ‘Check your inbox’ #343028
    happycack
    Participant

    Re: ‘You Have Mail’ or ‘Check your inbox’

    So I can ask for the same info or is it just privvey to asker and responder?

    in reply to: Servis M9503 Tripping Electric #342941
    happycack
    Participant

    Re: Servis M9503 Tripping Electric

    Electric cooker or just gas hobb ignition and lights etc.?

    in reply to: Servis M9503 Tripping Electric #342939
    happycack
    Participant

    Re: Servis M9503 Tripping Electric

    This machine is tripping the RCD that covers the plugs and cooker.

    Thought the ring main (sockets) would be seperate from the cooker (radial) unless it’s taking everything out? Out of touch with house wireing these days.

    in reply to: HPT WD72P #343011
    happycack
    Participant

    Re: HPT WD72P

    No matter what programme is selected?

    in reply to: Busy or what?? #342479
    happycack
    Participant

    Re: Busy or what??

    Sounds like quite a big turn-over. What areas do you cover?
    Paul.

    in reply to: Busy or what?? #342477
    happycack
    Participant

    Re: Busy or what??

    Sounds like a great plan.
    I wish you good luck (and can I come?)

    in reply to: new panasonic washing machine #342210
    happycack
    Participant

    Re: new panasonic washing machine

    My sympathies…

    this is my hand after sticking it in the back of a running washin machine, stupid eh!

    If nothing else let’s learn by it.
    Good luck and a speedy recovery.

    in reply to: ADP8332 F9 #342590
    happycack
    Participant

    Re: ADP8332 F9

    Found this on the net. Not sure of its source. Anygood?


    Is fault F4 easy to cure or does the dishwasher need replacing on Diplomat ADP 8332 ?

    S Dagg
    August 2007

    Hi, Fault Codes F1 Faulty NTC
    F2 Water leaking underneath
    F3 Heating fault
    F4 Drain pump failure
    F6 No water supply
    F7 Flow meter failure
    F8 Overfilling
    F9 Water valve not closing
    Hope this helps

    in reply to: Busy or what?? #342464
    happycack
    Participant

    Re: Busy or what??

    Sorry to hear that Phidom. Been doing it long and how big is your company?

    in reply to: Whirlpool HDW1011WG #342396
    happycack
    Participant

    Re: Whirlpool HDW1011WG

    Sorry Lawrence.
    Thought this was customers liason with you. I agree with Deltra.
    Sounds like heater to me too.

    in reply to: zanussi zwf 1431s #342327
    happycack
    Participant

    Re: zanussi zwf 1431s

    E30 is pressure switch related. But do check insulation of motor & heater. Low insulation can cause this error

    in reply to: Whirlpool HDW1011WG #342393
    happycack
    Participant

    Re: Whirlpool HDW1011WG

    Who is :the engineer: ???

    in reply to: Dyson DC02 dumps on top of filter #342144
    happycack
    Participant

    Re: Dyson DC02 dumps on top of filter

    Cone and/or cone seal missing or poorly positioned.

    in reply to: Hotpoint WF541 1400 rpm #338121
    happycack
    Participant

    Re: Hotpoint WF541 1400 rpm

    Anybody who used the SEARCH facility might have a clue.

    Sorry Jim, didn’t know a search section existed. Only use the site to check occasionally if my personnel fountain of knowledge could possibly enhance someone’s life or to put up one of my own problems. Found the search facility and will use it in future. Consider my knuckles firmly rapped!
    Regards
    Paul.

    in reply to: Hotpoint FDW20P #332292
    happycack
    Participant

    Re: Hotpoint FDW20P

    not c00109875 ? Only one I can find on this site and the search engine dosn’t recognise C00144314.

Viewing 15 posts - 31 through 45 (of 123 total)