[helo_75]

Re: Creda Europa S077EE oven

drop me an email on ow643@aol.com

ill send u the manual straight back

f8 is a temperature regulator issue, but thres a full test procedure and fix in the book
as soon as i get yer email, ill sendo it on!

[helo_75]

Re: Blomberg 1301ABB

ooohh how did i miss this?

the pressure bottle needs taking off, and the hole poking through

it was quite common

[helo_75]

Re: indesit iwdc 6125 uk codes and pcb

i think we need to clarify the fault
expecially if its an iwdc…..

[helo_75]

41018443 is the handle u require

[helo_75]

why do people always end up by calling the people your asking for help rip off merchants?

do you not get paid for the job you do? do you overcharge? would it be fair for me to say that youre paid far too much for what you do without knowing your skillset and qualifications, or indeed moneys paid to gain said qualifications

please choose your words carefully

as for your fault

u blew that by leaving the door open when u went into diagnostics.. e41 will show cos it tried to lock the door when it was testing components

the ee0 is apparant because ur in diagnostic mode
switching the machine on then off again will cure that

as for the fault.. do 2 more washes abd then go into diagnostics again, only next time do it properly

[helo_75]

3 – grey to start switch
4 – brown/white to supressor
5 – pink/white to timer connection 5

bernie had it right, but what if u got the lock the wrong way round?

[helo_75]

indesit have introduced a modification for this ‘issue’ which is nothing short of ridiculous

[helo_75]

im sure weve all thrown better ones away

theyre not much more to buy new are they?

[helo_75]

its a new wave

and the heaters faulty

[helo_75]

in fact , its that sort of thinking thats left you in the position your in

washin machines vary greatly… yes they all wash clothes, but theres a multitude of different ways of doing it

[helo_75]

erm,no

[helo_75]

im still amazed at the fact watchdog havent jumped all over this yet

theres some pretty disturbing pictures out there

[helo_75]

the c00110333 will only fit later models, not the early c00143588 different variations of machine im afraid

[helo_75]

there was a memo about this exact problem

check the pins in the plug to the fascia pcb

its not uncommon

[helo_75]

thats a new world/stoves variant

so should be much better

[Author]

Posts