Forum Replies Created
-
Posts
-
http://shop.ukwhitegoods.co.uk/Tumble+D … r+Fan.html
is usually the culprit
to be honest, u can see its out of shape by lookin at it
cleaning them wont help, they need replacing
side panel off ( 1 screw on top 4 down side.. side panel pulls back and lifts of)
the fan is under the grey housing, in front of the belt, unclip the housing and lift off
squeeze the clip open and pull the fan off, replace, and reassemble in reverse order
unusual theres no fault code
id be checking the heater first
then your lookin @ pcb ( surprise surprise )
just a quick one
have you checked the drain pump?
all zanussi appliances switch on the pump first, if theres no change in water level, they wont progress
other than that, its the pcb
hi.. sorry the threads been missed, it doesnt happen very often
ive had a few iz machines that have holes punched in the bottom of the tub.. they quite flimsy
e10 is normally a water intake valve faulty during dry.. and since it isnt a washer dryer, i suspect thats not the case
other things to check? the pressure hose from the bottle to the pressure switch? sometimes they chaff and can split, causing the machine to continually fill
the easy way to check, of course is to fill the machine.. how soon does it leak? does the machine fill very high? with leaks, a visual inspection is the only way to find the leak
as for replacements?
im a great fan of bosch machines.. still quality… a little over the price of the indesh!t stuff, and will handle what you throw at it
the rest of them are tat
of course you could look at the ise, well priced considering the length of guarantee and service network.. although i have no knowledge of them, and it would be unfair for me to pass jusdgement
of course, theres miele machines… quality without a doubt, yet poor back up and extortionate spare parts in the long run make it a sticky wicket
hope this helps?
email china mike, see if theyll listen, care, or even understand
haier machines are exactly what they say on the tin
