Forum Replies Created
-
Posts
-
boards probably faulty mate
it cant monitor the tacho, cos the triacs faulty, or the wires in the motor plug to the tacho have broken
experience would suggest a pcb fault, if the wirings goodc. Electrical module fault
The digital display shows “F4” to “F21”. Press
the “Pause/Cancel” button twice and select
“Drain/Spin” if there is excessive water in the
appliance. Press the desired programme and
press the “Start” button.
If the fault re-occurs, contact After Sales
Service (See “After Sales Service”).oh, and the dryer voltage is supposed to be 240v, it doesnt vary… why or how would it, its simply switched on and off
ooh good shout hotpnt
i cant beleive ive just read that
its funny.. the f1 error would still be there if the fault (other than what the poster said) is still there
what i mean to say is that the f1 fault was there before the ntc was disconnected, so of course the f1 fault would appear
its a board fault, as pointed out straight away
yes and no
for removal, a good size hammer and a good bar will get them out
for refitting, some people use a small drift and a hammer to tap them in, others use threaded bar,with thick washers to draw them in, everyones different
youll find the hardest part is gettin the drum out to split it to get at them if im honest
yes, can u supply the pnc number? its on the ratings plate, behind one of the salad bins… usually starts with a 9…….
yes, bryan has a point
it wouldnt hurt to try it in the house for a week or so?
nothing ventured, nothing gained
not all engineers are aware of the ambient temperature problem, it isnt common knowledge
thank you
i know, and ive said it before
none of us are perfect, and ill always take criticism, but, ive read some posts in here that have made my hair curl, and im nearly bald
i dont consider myself the best engineer in the world, but im certainly not the worst
im an engineer , where i work isnt an issue… is it?
i didnt have to tell u all , did i ?
bolto?
hate the dingles.. paul ince is doing a sterling job, taking them back down to the championship, although gary mugson aint the man for bolton
bring phil brown back!!!
