[helo_75]

well, u could look at the label on the compressor

or the label on the inside of the fridge, normally behind one of the salad bins

its more likely to be r134a, and the amount (in gms ) will be printed on the rating plate

[helo_75]

we use the masterpart ones the un1103

they tend to be better

[helo_75]

quite the opposite

you must try and see something through all this

what we as engineers want, is a hassle free aplliance, with a good service network

its fine if you want a maytag

most of us have bosch if we’re honest, iadom even has an older wma32

its not about the best engineering, its about value for money

[helo_75]

is there any movement in the drum at all?

that is , if you open the door and try and lift the inner drum, is there any movement?

does it rumble or feel rough as you turn the drum?

it is possible for something to be stuck between the 2 drums, as careful as people are, it can sometimes happen

[helo_75]

the pumps easy

on the front of the machine, at the bottom, theres a flap
open the flap, and unscrew the filter, anti-clockwise then look inside for foreign objects
it may be worth putting a towel down to absorb any water

other than that, it could be a bra wire or something between the drums.. try feeling round the inside of the drum to see if you can feel anything poking out of one of the holes

if either of these arent any help or dont cure your problem, then we’ll be looking at something else ( obviously)

hope this helps

[helo_75]

Models concernedProblem descriptionIntervention requiredIndesit condenser tumble dryersIS70CEX IS61CEX IS61CFR IS61CSK IS7021CEU IS70CEX IS70CFR IS70CSK AristonAS700CEX AS700CXFRIndesit

only these models apparantly

if its a ctd it doesnt apply
just crap caps as we call em

[helo_75]

The new timer part number is c00262836 now made by invensys which replaces the elbi one on the IS70 and IS61 range.

the caps with a white cap are a bit crap
if they have a black plastic top, they tend to be better

however, its always better to fit an 8uf cap to these wrecks

[helo_75]

yup, theres actually a new timer to prevent that

lol

hang on ill grab u a part number

[helo_75]

theres no financial crisis in the world, the media are scaremongering

what the guys are trying to tell you is that you will get a strong infrastructure of service agents geared up to serve the customer well

as opposed to maytag, who would be quite happy to leave you dangling for weeks for a part that should be in stock!!

your call at the end of the day

[helo_75]

3 years old

thank the good lord you didnt buy an indesit. or god forbid a haier

[helo_75]

there could be a chip out of the pump housing where the seal fits

ive seen it before

[helo_75]

only in the trade section im afraid
!

forum rules prevent us from publishing them in the public domian

sorry

[helo_75]

did u check the pump/ clean the condenser

that sort of fault is normally caused by the ntc in the condenser hose failing to read correctly

didnt you go into diagnostics?

[helo_75]

Re: Check out this price from Currys! £9.97

funny that, im doing a miele for a fiver

none left like, but i can supply other machines

usual scam

[helo_75]

if its the usual one, just take the back panel off

link wire goes from neutral on terminal block to clock or selector, depending on wheter it has a clock or not

[Author]

Posts