[helo_75]

erm, we’re all friendly in here

who told u e31 was a pump failure?

i thought e31 was incongruency between pressure switches?
i.e you analogic switch is faulty!

[helo_75]

the daewoos have a known drum issue

as for the hoover…. use your barge pole well

spend the money and buy a top of the range bosch if you want lifespan

[helo_75]

sue u for what? telling the truth

someone will die, of that im sure

that pic is quite mild

[helo_75]

ill hold back, untill people start reading posts properly

but hey, i know these machines are pants

[helo_75]

like i said… i have pics…..

[helo_75]

im not sure im allowed if im honest…. its very messy and far far worse than the indesit

[helo_75]

what sort of a question is that?

water only ever goes down, its a gravity thing

you really just have to have a look, or PAY someone to look at it for you

[helo_75]

i got some pics of an 18 month old candy that will make your eyes water

[helo_75]

and make sure the switch on the condenser flap is activated

or the pump isnt blocked of course

[helo_75]

best way to check is take lid off, then start machine, and when it starts to buzz, give the drum a push and see if it goes

if it does, its the cap

serial number will identify door lock, as 2 versions

[helo_75]

Re: Hotpoint Aqualtis F10

iadom wrote:AFAIK the pressure chamber is moulded into the drum and cannot be accessed to clean. 😥

Not sure if you can get at it by removing a drum paddle. ❓

take the sump off and u can see into it

[helo_75]

probably just wants a front seal… not a bad job, but takes time

[helo_75]

if u want to fix it change the heater

those in the know have seen the memo

[helo_75]

the pins probably missing from the inside of the door

[helo_75]

depends how he pulled it out…..

id he pulled by the door, then the seal may be off, and the lock not engaging?

and its worth checkin the motor wiring

[Author]

Posts