Forum Replies Created
-
Posts
-
240v at both the brushes? ypuve been testing live?
very silly, but either way, youve answered your own question
8 different variants of that machine
its normally valve problems tbh, i presume your gettin a H2O fault
if the valves checkóut and theres water there and the doors locking, its a good chance its a pcb fault
can you get the commercial code, cos if its an arcadia style, then the smart money is on the pcb!
erm, this was when the drier was new in production
if this is still evident for peoplew, please contact hoover who will reprogramme the pcb with a new eprom file to rectify this complaint
the lock will need changing for sure
sometimes, if your lucky, you can repair the tracks on the timer
no
the timer will have blown for sure
take it off and have a look, its quite cmmon on those machines
it wouldnt always be visible… but its a known problem for heaters to cause that issue if the pump and pipework are clear!
best test is with a suitable megger
id just change it if the drain side of things is ok
yes, but if u buy a new one, ull need to program it with a smart card and card reader
will cost u a good £130 for the stuff
http://www.emwelec.co.uk are the best option to keep costs down
you can check the thermistor form the pcb end, its two white wires, dissapearing down the back
if youir stuck, pm me yer email addy and ill send you the bulletin
