[helo_75]

ooh someones not happy

define proper make please (and ur justification )

im curious to know wot u think might be better!!!

[helo_75]

unplug the machine first of all

undo the 3 screws at the back of the lid

there is a clamp band using 7mm nts around the seal, you’ll see it if u look down the front

thats as far as i can go, just take great care, theres a hell of a lot of very sharp edges and pieces of metal stuck out everywhere, id recommend some sort of protective glove

hope this helps

MAKE SURE ITS UNPLUGGED, please!

[helo_75]

f13 is deffo a dryer fault, and its usually the thermal fuse or the thermistor on the heater box has broken

[helo_75]

the pump will either be blocked, or duff, of the float switch will be jammed

theyre both at the back, in the plastic housing, bottom right.

hope this helps, but unplug it first please

[helo_75]

so how does the sensor and the thermostat being ok (even thought it doesnt have a thermostat) mean it doesnt need an evap cover?

take it from r600a.. hes the samsung guy !

[helo_75]

cant u just read the number of the original belt? assuming that is, uve still got it?

[helo_75]

Re: Hotpoint washing machine broken

did u hear a bang? no blue flashes from underneath?

it could just be the door lock.. u tried banging the door?

[helo_75]

put some oil in it before it seizes again

[helo_75]

have you checked the spring behind the handle?

id be checking the motor as well, they go at times and damage the pcb

[helo_75]

then your ganna need the right model number, theres several fsd’s for that model, and they all differ greatly

ive had this problem before

does she not have her instruction manual?

[helo_75]

Re: Beko frostfree frg frz CA5411FF – not cold constant gurl

yup. you got a system problem

welcome to bekoworld!!!

at the very least it will need regassing, though experience suggests the compressor wont be pumping very well, and will need replacing

sorry to be the bearer of bad news, but thats the trouble with cheap turkish compressors

[helo_75]

fo5 pressure switch stuck on full

possible blockage in sump/pressure chamber

OR

faulty pressure switch

failing that, and i wouldnt be surprised.. the power board will have failed

[helo_75]

ha, i never said it was ur fault

freezer doors can be left open for a variety of different reasons – obstructions, faulty hinge/seal, etc

things like this do happen cos we’re human

hope your fridge freezer is working fine now

[helo_75]

not that easy to fit, since u have to code them

surely £150 is better than £250 ?

[helo_75]

because the evaporator would have been choked with ice.. since the door had been left open, the appliance would have been trying to bring the whole room down to temperature, by freezing all moisture

then the fan would be unable to circulate because it was blocked in the vent

common problem that

[Author]

Posts