Forum Replies Created
-
AuthorPosts
-
helo_75
Participantu might wanna clean the pump and filter chamber, and take that coin out!!
February 5, 2010 at 10:56 pm in reply to: Are all newish hotpoint washer/dryer model parts compatible? #311184helo_75
Participantno
in a word
the wd420 has a different style of motor, never mind the countless types of heater box
dont go there, ur cheapest option is to send you board to emw, around £60
helo_75
Participantjust change the green coil, and clean the condenser… job done
helo_75
Participanttheres a stat, well hidden
like the hotpoint its on th front duct
its at 12 oclock, open the door and feel upwards on the inside of the duct, facing the rear of the drum
good luck, it helps if u use a mirror
helo_75
Participantno, itd more likely a duff pressure switch tbh
helo_75
Participantu got a trade price on em? im on my way…..
helo_75
Participantget em on ebay then
helo_75
Participantyour selling 18 month old mieles for £120?
helo_75
Participantfor now….
helo_75
Participantso have haier
and theyre sh!t.
helo_75
Participantahem
bitron door lock has the relay in it
helo_75
Participantlol ~@ 15 min quick wash
heat, wash rinse and spin in 15 mins
id be using my head on that one
February 3, 2010 at 10:23 pm in reply to: LG washing machine direct drive noisy, moves, vibrates badly #310942helo_75
Participantud get more help if u didnt talk about the law and fit for purpose
have u even considered the reason why the lg engineer found no fault?
helo_75
Participantweve debated thi in th trade a million times
pig of a job isnt it
put a little bit of washing up liquid on the lip and it should be easier
the spring? just has to stretch over the seal, some people wedge something between the weight and the seal to hold it in place while u stretch it
another pair of hands is handy, one to hold it in place whilst the other stretches ittakes me 15 minutes from walkin in the house to leaving……
helo_75
Participantand rough the edges up with a bit of emery paper, that helps
-
AuthorPosts
