Forum Replies Created
-
Posts
-
if its a washer dryer, the pump had a toc which was known to cut in and out randomly after some use
usually, changing the pump will cure your problem
unless of course u have a rinsehold option selected
possibly
plug out , lid off
check heater and thermal fuse (usual culprit) with a multimeter
and check condensers not full of fluff or blocked
hope this helps
i still remember when we all thought the wmas were poorly built
its deffo the pcb, but worth checking the dryer ntc whilst ur in there
cos comet have been sellin em fer ages
infact, book a service call for two days after delivery, that should nail it, then when the engineers been, rebook a call for a week later
this might seem extreme, but you wont believe how many pcbs/selectors/motors/door locks and, yes, drums (welded) i fit
spot on
no different to a wm12x
but hey, its all rubbish, youve just paid more money for the tosh
and yes, thats based on experience.. faulty heaters rarely cause fault codes on indesit machines
its nearly always the heater relay
it WILL falter
is that model 12 months old yet?
stat situated same as vtd range, over heater, under banjo shaped cover!
plug out if your investigating!
