Forum Replies Created
-
Posts
-
a t piece why?
so water can pour out?
and how many modernday machines put the drain hose in the sink?
how is that your fault? if its common, its the machine thats the problem, not you or the plumbing
id be ringing hoover, and asking them to clarify the situation….
you need to do the usual checks!
plug out, take the belt off
is it free? is it stiff? is it rumbling is there any up/down playin in the drum?
possibly, theres something stuck between the drums
u need to investigate a little further
the haidryer trick is probably rubbish
when you say it doesnt work.. what exactly happens?
is there anything at all? any noises (humming/rumbling?)
does it trip the electric?
need more info im afraid!
it is on that model
massive money and no1 recons them
have you checked the wires on the door switch?
pcb again
unless its in the garage
have you cleaned the sensor bar? opend the door, look down , its a silver strip
try cleaning that firstahem
there will have been something in it, you juggling it around will have pushed it into one of the hoses
while you still can, take off the filter and put your finger in the holes and remove whatever is in there.. it wil wash back in
f08 – heater relay stuck
new pcb required… another pants indesit machine
youl need a pcb, a smart card, and a reader to program it
a snip at around £120 for parts
emw can supply one to plug and play, or indesit will fix it for a fixed fee of £99 if its under 5 years old
indesit, dont you love em, pay for it,then pay for it again cos its rubbish
if it has a base plate, u need to take the front off
1 screw behind soap drawer, remove front of door seal and lock
kick strip off , 1 screw
then 2 screws for front panel, and the front will drop down a little and lift off
the rest is quite obvious
if it doesnt have a base plate, take of the kick plater, 1 screw on pump housing, and pump drops out of bottom
hope this helps
