Forum Replies Created
-
Posts
-
Re: candy cpc240ffk
Can someone send me this file please hollytree.technical@googlemail.com
Thank you
Jem
Re: Neff Microwave/Oven Part Needed
In that case maybe I was looking at the wrong element as it means that you are actually looking for 271620 which I can’t help with.
Sorry
Jem
Re: Neff Microwave/Oven Part Needed
Go direct to Bosch/Neff (Phone:0844 892 8979) – let them know that you are trade on the phone and they will knock a bit off the price.
Jem
Re: Servis M9503W
I would be very interested if you can find it bazza as I have metered the activators and get a reading of 1K to 1.1K through them and 3.5K to 3.9K through each of the valves with perfect insulation readings for all.
Jem
Re: Bosch SGS model with plastic sump
Always worth testing just the mains cable on its own as I have had a couple of Bosch mains cables go down (not necessarily this model) – neither showed any obvious signs of damage.
Jem
Re: Zanussi zdt6244 integrated dishwasher
A bit of a long shot and I know that it sounds daft but does it have any rinse aid in it? I had a Zanussi dishwasher (different model) which I replaced the main pump on that then wouldn’t do anything – turned out that even though the rinse aid light had been on for a couple of months before it must have an internal counter which had hit zero at the same time as I changed the pump so it refused to do anything till I had topped up the rinse aid.
Jem
Re: Bosch dishwasher SGS43T72GB
It is fitted between the inlet valve (mounted on the back panel of the machine) and the tank in the side – trace the blue hose back from the tank and you will find it (rear left corner).
Jem
Re: AEG Washing Machine
Sounds like it is showing an E52 error which is “No signal from the tacho”, I assume that you have checked the carbon brushes?
Jem
Re: Bosch-SGS43T72GB Dishwasher
Take the left hand side panel off, it may be the flow meter which will be between the tank and the water valve or it could be that the pressure chamber is gunged up which is just below and and to the front of the tank.
Jem
Re: aeg 50610 d/w no rinse
Lack of Rinse Aid? – I know it may sound strange but I have seen several Electrolux based dishwashers that refused to do anything unless it had rinse aid in it, it seems to me that in some of their machines they have an internal counter that will allow it to do so many washes after the light has come on then it will stop dead.
Jem
Re: whirlpool oven akp203/ix not working since power cut.
I have not dealt with one of these but reading the user manual it says that it should show “LOC” for the child lock, what I also got the impression was that you set the oven temp on the display so I am wondering if it needs a temperature setting or if it is moaning about the temperature senser.
Jem
Re: NTCs / thermistors
Simple Answer – No
They all have different temperature curves and values.Jem
