Forum Replies Created
-
Posts
-
Re: Creda TCR2
have never had a problem you cant fit them wrong so is the door twisted failing that i would try another latch kit did you fit latch and springlatch assy
Re: Hotpoint BFI68 fill/safety hose
i had same problem pump was blocked noticed hose had turned red customer said it had been like that for a year or two looked on fastrack for part but customer decided not bother unless a problem arose that was 6mnths ago she justs turns tap off after use dont see why couldnt fit standard hose
Re: Hotpoint BSI620 Dishwasher
2covers behind kick strip removal can check water in base also motor plug can access if your lucky to be honest get it out drop base 3screw front and back dead easy tip on to left side put some towels down you can then access everything
Re: bosch wae24162uk/01
yep i have come across sticking gen carbons going back thu to check motor plug
Re: FDW60 with the ‘Eco’ and ‘Prewash’ lights flashing
could well be something floating around if you get recall i would go straight to the pump
Re: bosch wae24162uk/01
thanks for that will check it i should have done that still like to know if heater can cause prob
Re: FDW60 with the ‘Eco’ and ‘Prewash’ lights flashing
most prob blocked pump hold prog button down to cancell prog reset to pre wash pump should run for a few secs before fill if you here a humming noise blocked pump is the fault
Re: Hotpoint WMF760G Fault
it will be the board the best way of fault finding on hotpoint machines check sump /pump for blockage check /test heater/wiring broken to motor pug /motor brushes 8 times out of 10 its none of the above nearly always the board thats my experence
