[hotpnt]

Re: Indesit IDL530 reset code

possibly a door lock problem too?, it there is still water in the base the light should be flashing to show a fault

[hotpnt]

Re: Indesit IDL530 reset code

if its on constant then sounds like its stuck in a prog, have you held the programme button down for 10 seconds? (if the machine has a beeper it will beep long then 3 short beeps when reset)

[hotpnt]

Re: Indesit IDL530 reset code

hi, is the light on constant or flashing?

[hotpnt]

Re: Indesit WIA101UK

also if it is only 3 months old why call someone else in??

[hotpnt]

Re: indesit dishwasher

hi, if the wash pump is ‘humming’ but not turning & not jammed then it has to really be the motor, as for the clips normally just open the crimped section just enough to slide the hoses of then re-crimp with sidecutters

[hotpnt]

Re: Ariston chucking water out of soap drawer

no, the whole prog is different, to take care of delicates on a slow spin, however, back to the colour catchers, i went to a machine 3 times b4 i found it the first time, would pump/spin fine, then few days later flood on a spin again, they can stay in sheet form and float around between the drums, even stick to the outside of the inner drum so you cant see it, but can also float down over the drain outlet to cause the spin flood then move away the next time

[hotpnt]

Re: Ariston chucking water out of soap drawer

if its intermittant it may well be one of those ‘colour catchers’ floating around between the 2 drums!, sometimes sitting over pump & others not

[hotpnt]

Re: Card Payments

cheers, just wanted to get some idea b4 i try the bank, so do you get a mobile terminal so you can process the customers card in the house for £19 a month?

[hotpnt]

Re: Card Payments

so do you change your whole bank account across or is it a stand alone sevice? im unsure how this all works

[hotpnt]

Re: Hotpoint WMA30 chewing clothes

(or white as the new ones are coming in, looks nice having 2 blue & 1 white in it!)

[hotpnt]

Re: Hotpoint WMA30 chewing clothes

If its made holes by rubbing against the door seal, then it is either badly unlevel (leaning to the front) or it has been overloaded, pushing the clothes out into the seal on spin, also check that all 3 of the drum lifters are secure

[hotpnt]

Re: hotpoint wd420

if pressing the buttons brings it back to life then most prob a module fault

[hotpnt]

Re: Td Drum rubbing

its the fluff that builds up around the fron seal/pads that pushes it back

[hotpnt]

Re: HOTPOINT CTD80 Tumble dryer

also make sure there is no earth fault on the machine, as the cycle stat operates on the neutral, so even if it cuts out the heater can still power live-earth

[hotpnt]

Re: Hotpoint EW81 cooker oven fan keeps running

would think it has to be either a clock fault or earth fault

[Author]

Posts