Forum Replies Created
-
Posts
-
Re: How to remove/replace the door gasket on Hotpoint WMA66
a job well done, congrats sassy, now if i need another engineer to take on ill give you a call, really,
Re: Appliances on “stand by”
good one kwatt, i would have to say that i thinka lot of the module failures i see now could well be due to the fact that with no physical make/break on/off switch the modules have power flowing through them 24/7 even when the off button is used, as all it does is send a signal to the mod to put the light on
Re: How to remove/replace the door gasket on Hotpoint WMA66
have you removed the lid, control panel & top 2 screws on the front panel???? PS I HOPE THE PLUG IS OUT
Re: Hotpoint Aquarius WD440 faulty controls
Romania & Italy, which country would you prefer your modules from?? sounds like a new topic needed 😆
Re: Hotpoint WF560
yeah looks like johnny’s got it, looks like mini load is the 4th light down = F01 = motor triac short on the module
Re: Hotpoint WT965
not usually no, pump blockage even partial can cause to sipn with too much water in & bang, also had a lot lately where customers using ‘colour catcher’ sheets, they can float around between the 2 drums & cause occasional pump obstructions
Re: Hotpoint WF540 new pump set up.
yep, thats true, however ive struggled to pull out several machines to clear blockages only to find i didnt need to as the pump is at the front, how to makeyourself look a fool!!
Re: Hotpoint WF560
can you find out which light it is from the top from the customer as again there are 2 different WF560 models, you can only tell from the sticker on the back too, the latest one is the WF560/1 !
Re: Hotpoint WF540 new pump set up.
hi, there are 2 different models the WF540SC (screwed tub) & WF540WE (welded tub) bit of a pain when ordering as if you pick the wrong one all the pasrts are different
Re: Samsung RS21DGRS Ice Build Up problem
maybe we should take up teaching customers how to write and spell correctly instead?? 😆
Re: Hotpoint Aquarius WD440 faulty controls
good, so fuss over, no feet stamping for a new machine & everyones happy. the end, (till next month 😆 )
Re: hotpoint wd61
yep. the genuine ones are coming through without the plate, plate alone is obsolete, you may find one with the plate, just hit & miss at the mo
