[kaibart]

Yes this is a full strip down job the both side panels and rear panel need to come off and drum removed to do a proper job
might be worth calling bosch out to it there callout is only £106 and I don’t think you need parts and if they cant fix it they will give you a £50.00 money off voucher for a new appliance

[kaibart]

Also check the vent hose as these dryers have to have the hose directly out or min 400mm before a bend in vent hose

[kaibart]

I normally find that the part number is printed on the side of the switch it is easier that way and I know I’m getting correct part. Kai

[kaibart]

The main module is at fault motor triac failure E-09 is kai

[kaibart]

This is all the error codes I have hope thus helps

[kaibart]

Looked at error codes and only thing I can see is power board issue

[kaibart]

Can you check that model number as it coming up as a washing machine not washer dryer

[kaibart]

There was a tech bulletin about the heater ntc causing door lock problems on some Beko washers might be worth checking that

[kaibart]

I more than likley the display pcb rather than the facia

[kaibart]

So I pointed you in the right direction I’ve changed a few good glad it’s working

[kaibart]

At the back of the oven there will be a small pcb thatbis probably faulty as that is where the power comes from to the elements

[kaibart]

Might be worth taking the motor off to check if anything is blocked in the impeller if had 1 or 2 of these

[kaibart]

The plastic cover isn’t available as a spare it’d a complete plastic base

[kaibart]

Ignore 11 as this model doesn’t have a heat exchanger

[kaibart]

This picture

[Author]

Posts