Forum Replies Created
-
Posts
-
With the bosch heat pumps u not need to change the clip and they can be done from the front without removing the dishwasher if built in just smear a bit of rinse aid or coffee machine lubricant on and your way to go
The f27 fault relates to the pressure switch so your definitely on the right traced also says check wiring
How old is the machine as there is discounts available depending on age with parts but not with call out
If the flashing check water light comes on there are a few things it can be the contact Reed switch, the drain valve or the heat pump
You might be surprised as they have changed the heat pump assembly as side panels come off on some models now
There’s no condensing pump fitted there is a drain pump that is easy to access at the rear how old is dryer has it been used alot?
I would check the tocs, but there are 2 or 3 different pcbs variants and I would check ptc in main oven that pcb controls
If you have taken the belt off surely that means it’s the motor as the drum will not move without belt on as dave said ring hoover
At bosch it’s called a Swiss clean and when doing this if you have alot of fluff inside the machine this us normally down to the front felt seal falling so it good practice to change it when stripping fown
