Forum Replies Created
-
Posts
-
They do not do service manuals as they try to keep the technical information in house if you wish to know the resistance values of any component i may be able to help you as there is generally the same values on most components give or take
Right the machine is not designed to work anywhere other than in a kitchen where the ambient temperature is above 5 degrees i have a hoover washing machine where the machine is still in warranty and it is in a cold area condensation and moisture has got on the motor and caused the machine to fail a pat test I changed the pcb nfc electronics and this did not cure the fault im going back tomorrow to change the motor and the harness I will update u but if this fixes the problem the machine will definitely go faulty again dew to where its installed
Not really but has always been a issue with customers overloading on the quick wash programmes on the hoover machines going back 13 years when they had the old dc rectifier modules fitted thats the only thing I can put it down to failure as the way they set up the software on the modules
The new hoover washing machines built in China with the haier brushed motor are very unreliable its the overloading of the machines on the quick wash programme that causes the over heating of the carbon brushes
Well you say the switch is working and element has continuity have you checked you have power to the element or fan motor, other thing is the clock set that would be the 1st thing to check
I’ve found that the hotpoint / Indesit cookers seem to work really well as I do alot of installing and the vestell made ovens such as bush etc seem to be not as good from the feedback I have from customers
If the heater is 2976680600 it is in stock as dave has said the other one is out of stock what does the heater look like there maybe another part number that is in stock for a same heater post a picture of the heater and connections to it and I maybe able to help
Expectations definitely unrealistic they do realise that there was a lockdown in Europe aswell where most appliances and parts come from
It will probably produce excessive foaming i would suggest stopping the dishwasher rubbing a bar of soap just under where you put the detergent, ie which is alkaline and fil and empty it at least 4 or 5 times, the excessive foam can cause the dishwasher to leak so i would definitely do this
Wht814 wht914 washing machines are smeg made by beko the smeg parts are more expensive due to the pcb being programmed for smeg, pick any 8 /9 kg beko 1400 spin
If you have trouble order the belt or the fitting order this 1 will fit easier for you if you fit the original pay note to the position of belt
