Forum Replies Created
-
Posts
-
Re: Hoover DYN8144D1X
1st thing do a insulation check as low insulation under 5meg can cause issues normally the heater can cause odd faults 😕
Re: hoover wahser dryer
And it’s at least 8 years if not old these nextra where the 1st machines I learnt to repair
Re: hoover wahser dryer
I would change dryer module after I cleaned the condenser on the back which is a bit of a job and checked all the other components for continuity and cleaned the fan on the dryer
41014754 part number for dryer module kaiRe: Hoover Condenser Dryer Skipping to cool down cycle
Only things to check are heater and front ntc
Re: candy gcc591nb stops mid cycle
I would be looking at front ntc. If the dryer is outdoor is the ambient temp above 5 degrees if so this could be a problem. Kai
Re: Half of Candy induction hob not detecting pans
Try putting the grill pan out of your oven on the left hand hobsto See if it does the same if it does you could be looking at a faulty pcb
Re: Beko DL1243APW dishwasher
Worth checking the anti flood microswitch as this might have burnt wires on module
Re: Hoover VHC681B stops with all lights flashing constantly
1st thing to check would be the heater. Do you know how to use a multimeter if so check continuity through the thermostat and ntc on the heater. 3 common faults when the lights flash are heater front ntc, thermostat and worse case the pcb is faulty
Re: BEKO ECO WMB 81445
This may not be what you want to hear but the main motor is at fault it has a small pcb built into it and that has failed will probably be cheaper to buy a new machine 😕
Re: Error 15 on my Hoover Infinity Aqua Vision Model no DYC8
Please post 311 number sticker inside the door and I will be able to help you
