kaibart

Forum Replies Created

Viewing 15 posts - 976 through 990 (of 1,334 total)
  • Author
    Posts
  • in reply to: Hoover infinity condenser dryer vtc 5911nb #450502
    kaibart
    Moderator

    Re: Hoover infinity condenser dryer vtc 5911nb

    Check for blockages in the condenser use a shower to clean out or a pressure washer allow to dry before you refit condenser

    in reply to: hoover wdryer wdyn458a #450480
    kaibart
    Moderator

    Re: hoover wdryer wdyn458a

    It’s the wrong model number thats why 3 listed wdyn854dg-86s wdyn854db-80 wdyn854d-80 sensor should be the same on all 3 models will pm you some info kai

    in reply to: hoover wdryer wdyn458a #450478
    kaibart
    Moderator

    Re: hoover wdryer wdyn458a

    I’ve put exactly what’s on Hoover’s service error code list my sure ntc should read about 28kohms. Only faults I’ve had on these are blocked condenser and the fan motor coming loose on upper housing.

    in reply to: hoover wdryer wdyn458a #450475
    kaibart
    Moderator

    Re: hoover wdryer wdyn458a

    E11 fault open circuit heater ntc probe and or module that’s what the error code means

    in reply to: Hoover Vision VHD 9143ZD no motor action #450443
    kaibart
    Moderator

    Re: Hoover Vision VHD 9143ZD no motor action

    Check motor plug wiring if ok will definitely be main pcb probably ber the price on them 1 of the most reliable machines candy produced

    in reply to: Gas tumble dryer #450349
    kaibart
    Moderator

    Re: Gas tumble dryer

    Heat pump dryers I really don’t like they take a age to get warm and condensers have more maintenance and take longer to dry than a vented a basic white knight at £139.99 at the range is amazing value for money.

    in reply to: Gas tumble dryer #450347
    kaibart
    Moderator

    Re: Gas tumble dryer

    1st of all you have no gas pipe there as far as I can see and you can’t have a gas dryer as ventilation has to be correct which it isn’t so from a gas safe engineers view go with what martin has recommended for you kai 😉

    in reply to: Candy GCC591NB flashing lights and constant beeping!! #450299
    kaibart
    Moderator

    Re: Candy GCC591NB flashing lights and constant beeping!!

    Change the heater it will be faulty

    in reply to: Built in dishwasher #450227
    kaibart
    Moderator

    Re: Built in dishwasher

    Cheers glad there isn’t any other way as the rear feet would not budge kitchen fitters got a lot to answer for

    in reply to: DWDNT1211 Sump hose #450190
    kaibart
    Moderator

    Re: DWDNT1211 Sump hose

    Don’t know but that was the only 1 listed

    in reply to: Bosch WTV74105GB/15 tries to start and then stops #450153
    kaibart
    Moderator

    Re: Bosch WTV74105GB/15 tries to start and then stops

    If the vent hose has a bend before a straight run of 400mm the dryer will cut out just a thought

    in reply to: DWDNT1211 Sump hose #450188
    kaibart
    Moderator

    Re: DWDNT1211 Sump hose

    Put in Daewoo sump hose into search

    in reply to: DWDNT1211 Sump hose #450186
    kaibart
    Moderator

    Re: DWDNT1211 Sump hose

    This is the only 1 I could find DAE3613272300 part number on connect

    in reply to: Beko WMB81241LB display 00.00 #450073
    kaibart
    Moderator

    Re: Beko WMB81241LB display 00.00

    Does the pump run?

    in reply to: Beko WMB81241LB display 00.00 #450071
    kaibart
    Moderator

    Re: Beko WMB81241LB display 00.00

    Try checking the brushes on the motor

Viewing 15 posts - 976 through 990 (of 1,334 total)