Forum Replies Created
-
Posts
-
Re: Error code E08 Hoover HWB814DN1
You know it’s a motor fault so the motor will need replacing as long as you have continuity through the wiring to the motor. 😉
Re: Hoover VH W656d Error E07 afger pcb change
Check heater low insulation can cause this but the fault code is what you already know
Re: Hoover 1500 HSP 15 not starting….
Looking at the pictures all the wiring looks ok I personally would try a door lock is the handle on the door ok ? Try pressing the start button and carefully try to engage the door lock by using a screwdriver
Re: Hoover 1500 HSP 15 not starting….
Try selecting a spin programme and see if the door locks, I can’t work out how the door is locking when you take pressure switch hose off 😕 The only thing I can suggest is checking all the wiring to every component when you remove the drum on these to do a bearing change the water valve wire on the back sometimes catch on the drum pulley, do you have access to a multimeter of so check the following
Water valve should get a reading of 3-4 kohms on both valves
Pump should be around 180 ohms
Heater should be around 18 ohms
Ntc with 2 yellow wires should be a reading in kohms.ive uploaded the test proceduce for you to try also hope this helps youRe: Hoover 1500 HSP 15 not starting….
So when you start a wash programme the door locks then? I need to start at the beginning as the water valve and pump work together. For me to help solve where you have gone wrong we need to confirm door is locking
Re: Hoover 1500 HSP 15 not starting….
How have you got the pump to run this will only work if the door lock light stays on? I would suggest changing the door lock if the door lock light doesn’t stay on.
Re: Dedietrich induction hob
Went out to this yesterday and I think the power board is gone I press the on off touch button and I can hear the relay click but nothing lights up, problem was they have just had a granite worktop fitted and I can’t get the bloody think out to confirm fault hoping this job doesn’t turn into a can of worms.
Re: Dedietrich induction hob
Thanks blackandwhites going to look at this tomorrow morning so at least I’ve got somewhere to start Kai
Re: HELP lamona oven or hoover oven
It looks like it’s a beko or stoves I’m sure someone on here has access to the beko website I’m sorry I haven’t only to Hoover site kai
Re: HELP lamona oven or hoover oven
If it’s a Hoover it will have a number starting 3 something if it’s a beko which make lamona it will start with a 7 kai
