Forum Replies Created
-
Posts
-
Re: Beko D/w tripping
Check the wiring in the right hand side panel I’ve had a wire touch cabinet and earth out kai
Re: Hoover OPHS712DF-80 Display setting flicks around
This fault can also be down to the heating element
Re: Hotpoint WDPG8640X
All I can suggest is checking the ntc on dryer or wash ntc they can cause odd faults 😉
Re: washing machine noisy spinner
I would imagine the tub complete has failed the drum they do go a lot as it’s a 1600 spin and people more often a lot put a full load in on a quick wash programme 😉
Re: Hotpoint SISML21011P not heating water or drying
A&b on the photo is where the wires connect to the heater this is where you check continuity if you don’t have a reading the heater is faulty c is irrelevant
Re: Looking for advice about some burning noted
If you have your boiler serviced annually a gas safe engineer will only carry out a visual check of the appliances unless you can smell gas from the area the fitting is there is no issue only it’s not a very good job.
Re: lg direct drive squealing when trying to spin
Check the rotar assembly the spline could be slipping where the drum sits Kai
Re: Older than me
If you look closely at the picture you wil see the customers mod to the grill door springs lol
Re: Hoover tumble dryer
What for a 45 minute job they are a hell of a lot easier than what they used to be easy peasy when you used to work for hoover 😉 you only had 40mins per job including driving there
Re: Zanussi no heat
The customer bought 2nd hand only paid £50 for it so I know the repair will be over £60 and she wount go with that so she probably gonna end up buying a new 2nd hand 1
Re: Beko WMB91243 Washer Module
Check the dc module if tracks are blown then that will need changing
Re: Bush AE6BFS oven not working? Please help
It’s behind the control knob to turn the oven on this will take some dismantling of the cooker make sure power is off if you are to investigate
