Forum Replies Created
-
Posts
-
Re: Blown Bosch module
Got machine working 2nd hand facia panel with a wae24363 touch button display board and hay presto machine works fine so you can just plug in any display board just to confirm it’s gone, this is not something I would do for a customer it’s for a re con lol
Re: Hotpoint WMD960 Leaking
Dispenser is faulty it leaks on last rinse check if the powder draw has 2 holes at the fabric softener end you will have to remove to check
Re: Samsung WF1114XBD/XEU Error 3E
Well the 1 I had was a wf1114xbd/xeu 03 y47a53adc00109r which is obsolete
Re: Samsung WF1114XBD/XEU Error 3E
Ive been to a few and it will normally be the main pcb as the drum will judder slightly when put onto spin and the main pcb is obsolete kai
Re: Frigidaire grill element
Put a pne in on connect no longer available haven’t got a pic so I wrote it off over15 years old
Re: Wma42
I don’t use them anymore had problems with modules always being faulty and sending them back and foe.
Re: Wma42
Haven’t inspected board but suspected it had gone as he has door lock changed before and I know the door locks on the wma range are prone to taking out pcb shame the board isn’t available,thanks good to have a 2nd opinion sometimes cheers kai
Re: Hoover GCC590NB-80 stopping.
No its a ntc on the front of machine on need to take front panel off easy job.kai
Re: Hoover GCC590NB-80 stopping.
Change front ntc if it’s not in the house as the ambient temp is designed for a house 5 degrees but they go faulty a lot , as do the pcbs Kai I’m ex Hoover
Re: rubbish non genuine dryer capacitors
The capacitors are failing a lot on the hoover dryers I am ex hoover engineer and 15 mins the whole dryer would be apart, I agree with pattern ones from masterpart are rubbish every single 1 I fitted I was back to in a month, I only use genuine hotpoint 8.5 capacitors on the dryers and never had a call back.
Re: Why be gas safe
I know the gas safe reg I was making a point about why customers think it’s ok to fit gas appliances themselves and if anything goes wrong the appliance in warranty they call someone out and its there responsible to make it save at no cost to the customer.
Re: indesit IWD7145 door locks door noen flashing but nothin
Check wires on door lock if they are ok change Arcadia module
Re: Masterpart
I always shop around for the best prices and if I want a hotpoint indesit creda cannon part I go direct they wount be beaten on price,problem is that when a customer asks for a price for a part you need to order because you haven’t got one on the van out on the road you look at the price and quote them because you don’t have 4-5 companies to look at with a computer screen in front of you especially if your doing 14 plus jobs a day. What gets on my nerves is connect putting vat on carriage,qualtex doesn’t do it. Plus I thought forums where about having a opinion everyone has 1 and sometimes not everyone agrees. Kai 😛
