[Lawrence]

Re: samsung WD8704 pump problem

Thats a weird one Dave ,check the loom feeding the pump hint chafed ,and I have known poor crimp terminals,I assume you’ve got 240 at the pump ? they are just a normal askoll pump so nothing clever,otherwise yeah its the board and you need the part number off the board itself

[Lawrence]

Re: beko oven not heating up

Just because the grill element works it doesn’t follow that the fan element should
These elements are one of the simplest to fit and so long as you put the wires back on terminals in the same places it should work.

[Lawrence]

Re: Broken Hob Glass – Cracked Whilst Cooking??

I concur with the others,its had an impact on the edge and the crack has spread.

[Lawrence]

Re: beko oven not heating up

Check the neutral connections in your terminal block it sounds like when you have opened the rear panel you have disconnected a wire

[Lawrence]

Re: Minerva Service

There were a few teething troubles ,but everything seems to have bedded down now.

[Lawrence]

Re: Dishwasher Identification Needed

Its an Omniwash
they are on 020 8813 6616

[Lawrence]

Re: KENWOOD D/W

Whats the heater resistance like when it pauses and have you checked door wires?

[Lawrence]

Re: LG F1403YD5 noisy when slowing down on spin

Check the centre of the rotor ,the spline can sometimes strip

[Lawrence]

Re: Stoves 1000DF (444445371)

attached

[Lawrence]

Re: Footwear?

I get through a pair every 6 months with one pair of laces changed,and they are comfy to drive in ,they are not quite so high at the back as some others and the protective toe is non obtrusive

[Lawrence]

Re: Footwear?

We all wear Dickies Antrim ,safe but flexible

[Lawrence]

Re: Back to Royal Mail.

timdowning wrote:
You should have stuck with Qualtex or Connect. Next day delivery with a time slot…

But if you only want one element the carriage is more anyway surely..

[Lawrence]

Re: LG noisy suspect slipping rotor cam

It will be the rotor ,the newer ones have a strengthened spline centre.

[Lawrence]

Re: Fishing

Ive been giving this some thought,The only way I can see it working is if there was a web shop of products all with pre agreed prices.
I point my customer to said website they choose the product and buy it and enter a code (that I give them) I then get a “commission” as well as any service work.
They then have the option to install themselves or pay me to do it (I’m thinking integrated)
At the moment I point my customers to AO (who don’t install in my area) I get the install business but I don’t get the warranty work and potentially lose a customer so I’m interested…

[Lawrence]

Re: Beko 85 w dead

LA 85w or D.SC.

[Author]

Posts