leavemetogetonwithit

Forum Replies Created

Viewing 15 posts - 1,636 through 1,650 (of 3,974 total)
  • Author
    Posts
  • in reply to: Samsung P1253 #327312

    Re: Samsung P1253

    Should think it’ll be the same as one next door. Triacs all do the same job AFAIK. If the package is same then legs should be in same order. In fact there’s some print on the board which you can probably still read once you clean off the burn. This should confirm leg position. Nothing to lose.
    Ah, slight problem. That number M2LZ47 seems to be a bit foreign. Googling no. brings up datasheets but not much that seem to relate to this component. Still, if the print on the board says e.g. gt / Mt1 / Mt2 or gt / A / C or some such then it probably is a triac and as long as you get one same size and package you should be OK. RS or Farnell will have PDF’s showing what leg is what on everything they sell.
    Mike.

    in reply to: Whirlpool electric comm. t/dryer 3RL8000KQ mtr start sw #327063

    Re: Whirlpool electric comm. t/dryer 3RL8000KQ mtr start sw

    After calling Whirlpool and e-mailing them with link to motor picture from a Connect retail site so they could identify what I needed, I looked back in my records to Dec. ’07 and at last found the original order was for complete motor. So I hadn’t obtained the switch after all. 😳 Apologies if I caused anyone here to undertake any fruitless searching.
    Mike.

    in reply to: Whats the most annoying thing customers do? #107785

    Re: Whats the most annoying thing customers do?

    Phone rings.

    Me: (bright and cheerful as ever) “Hello.”

    Old lady: “I’ve ‘ad you befoer.”

    Me: (Well that gives you the inalienable right to claim my services for the rest of my life, surely.) “Uh-huh?”

    Her: (Gives a surname).

    Me: (Oh yeah, like I remember everybody’s name from the last ten years.) “Uh-huhh”

    Her: “I’ve got a leak. (:?: 8O)

    ……………………. It’s the rubber thing round the door.”

    Me: (Ah, now we’re getting somewhere.) “What make and model is it?” (Take phone with me to teapot.)

    Her: “I’ll get ‘im to go an’ ‘ave a look” (Grunts heard in background.)

    Im: (distant) “Eco-care”.

    Her: (I wait with my ear at least 6 inches from the phone) “ECO-CARE”

    Me: “Hmmm”

    Her: “Bekko”

    Me: “Ah-hah!… Model no.?” (Pouring second cup.)

    Her: “That is the model no. what I just gave you.”

    (Episode 2 next week.)

    Mike.

    in reply to: Motor Tester #327524

    Re: Motor Tester

    Don’t forget that sometimes they’ll work OK until you put a load on.
    Mike.

    in reply to: Pulley Bolt #327477

    Re: Pulley Bolt

    You forgot Indesit (as was) hub fixing bolts.
    Mike.

    in reply to: Zanussi FJ1254W No go #327486

    Re: Zanussi FJ1254W No go

    Them electronics, they don’t like it damp! Or might be loom fault. Wiggle all wires.
    Mike.

    in reply to: Have I got spyware, malware, whatever it is? #327457

    Re: Have I got spyware, malware, whatever it is?

    Well this has been going on for a long time (months) so I’m not overly worried as my ID doesn’t seem to have been nicked yet and I think it’s possibly just people that want to sell me stuff? I’m careful with e-mail and unless they can follow my keystrokes they won’t get my passwords, is that right?
    I’ll take up your offer though Jim when I get the energy for it. Thankyou.
    Mike.

    in reply to: work dead #372402

    Re: work dead

    Ever the optimist 😆
    Mike.

    in reply to: Samsung P1253 #327309

    Re: Samsung P1253

    Can’t get the full size image to load.
    Mike.

    in reply to: hoover hnf6167 and spin intermitent #327400

    Re: hoover hnf6167 and spin intermitent

    Hoover selector switches are cheap and easy to replace and somewhat unreliable. I’d go for it; even if it doesn’t work this time you’ll soon find another job where this part is required.
    Mike.

    in reply to: Zanussi ZWD1270S 91465332000 #327396

    Re: Zanussi ZWD1270S 91465332000

    Must be some sort of joke. They’re trying to wind us up.
    Mike.

    in reply to: work dead #372399

    Re: work dead

    Martin wrote:Down here it’s deader than Tutankhamun’s tomb…………………… 🙁

    So how’s the e-bay spares selling experiment going Martin? I had high hopes of that.
    Mike.

    in reply to: Do company’s really take on newbies #327245

    Re: Do company’s really take on newbies

    He’s done all that and is still a young man? What a comment on the sad times we live in that he wants to fix washing machines.
    Mike.

    in reply to: ISE10 v Dyson CR01 #327274

    Re: ISE10 v Dyson CR01

    Hmm. Think I’ll get a truck, buy a few off e-bay where they seem to be fetching £20 to £200, and take ’em up to Sotheby’s :lol:.
    Mike.

    in reply to: Do company’s really take on newbies #327237

    Re: Do company’s really take on newbies

    It depends also on whether you must have a good wage coming in on a regular basis or don’t mind the ups and lots of downs in income which self-employment guarantees. You can get top ups to your low income via working tax credits if you do choose self employment. I used a site called entitledto.com about 5 years ago when I found out about this. It was dead easy to use an online form to check what I’d be entitled to without revealing my ID etc. So I was able to then put in a claim with much more confidence of it being worthwhile. The entitledto site seems now to have transmuted to http://www.turn2us.org.uk//about_us.aspx which seems to be a charity. Should still be worth a look if you’ve got income under £66,000 per year.
    😆
    Mike.

Viewing 15 posts - 1,636 through 1,650 (of 3,974 total)