[Martin]

Re: Trade Access

Well I mentioned eng14 last time, what about legsthediver and (get this )bendaireboy ????????????……….what’s that all about?????? :rotfl:

Yes I know, “probably good engineers” and I am willing to accept the challenge if they’re not all the same, meanwhile I’m keeping my back to the wall 😉

[Martin]

Re: Hotpoint condenser dryers

Thanks to you guys legs should be able to dive in with greater confidence of not getting out of his depth 😀

[Martin]

Re: Can anyone translate this please?

Goatboy wrote:Where did you find it?

It was an email I got from someone in Afghanistan…. :con:

[Martin]

Re: Hoover AL150 Washing Machine

johnnyhoz wrote:One more thing Martin are circuit diagrams available for appliances to aid fault diagnosis?

Nothing more on this model but the diagrams I sent you I’m afraid 🙁

[Martin]

Re: Hoover AL150 Washing Machine

johnnyhoz wrote:What else is in that circuit? any ideas

The return feed is via the Pressure Switch ❗

[Martin]

Re: Bosch WFL2260 W/Machine not spinning

Ade wrote:Any suggestions gratefully received

Motor brushes worn out Ade I would think. Get a local independent engineer to fix them for you. Click on here

[Martin]

Re: Partscenter Friend or Foe??????

OK Guys!

Cool this thread please and give Washvac_ Wayne and his colleagues at Parts Center a chance to sort things out for us. Clearly from this you realise THEY are listening to our problems and concerns, so lets just back-off and see what they make of it OK?

Carry on Washvac_wayne…please! 😀

[Martin]

Re: Hoover AL150 Washing Machine

Yes…check your email 😉

[Martin]

Re: Ariston ALD12S Washer/dryer

OK Jim, if you have cleaned the condenser and confirmed the valve flows to the condenser, are you sure water is flowing through the ‘Restrictor Nozzle?’ They usually fur up after a couple of years use anyway and need replacing( well down south they do, possibly not in the frozen north?) But worth replacing nonetheless 💡

[Martin]

Re: Artiston Washer Dryer – Margherita

OK Susie forget that idea, instead concentrate on checking the drum is clear of any problems. If it is clear, then do please make sure to wash all fabrics on the correct programme. Check their ‘care labels’ and put on the appropriate programme for that label. Also use a quality detergent and not the regular supermarket ‘own brand’ rubbish!

Hope that sorts it for you?…Now go read the User Booklet that came with the machine for the finer points 😉

P.S Use a ‘Laundry Bag’ to wash real delicate stuff in 🙂

[Martin]

Re: Partscenter Friend or Foe??????

jeremy wrote:It will more than likely end in them pulling the appliance spares aspect or selling it off.

Yep! That’s what will happen I reckon soon enough 🙄

[Martin]

Re: Slugs in Dishwasher!!!

Chriztopher wrote:House only 4 years old

Was it built on the site of an old graveyard I wonder?????

[Martin]

Re: Artiston Washer Dryer – Margherita

Hit the link in my last post to find out?

[Martin]

Re: Artiston Washer Dryer – Margherita

Susie,

Overloading is the primary reason for damage to clothing in a machine!

Secondly, the drum on your machine is just slightly thicker than tin foil, so it is prone to damage very easily. The three ‘Drum Paddles’ often loosen and can pinch delicate clothing (especially synthetics).

Finally, don’t waste your money on calling out the manufacturers (far too costly) Instead try Repairs@

[Martin]

Re: 1701583

leavemetogetonwithit wrote:Anybody else had this problem?

Not likely…TOC40 TOC Kit from Qualtex, your local agent should be able to stick a pair in an First Class envelope for just 30pence P & P for it to drop on your coconut matting first thing tomorrow 💡

[Author]

Posts