Forum Replies Created
-
Posts
-
Reddy wrote:It’s still working but dripping, so i’ve put plastic bag over motor connector block for now. I just wondered if anyone knows the ‘cure’ or part no. or description for the seal at the reaer of the drum. Thanks
If your machine has a metal rear drum backplate then you will need the gasket replacement part no: C00103637.
If the backplate is plastic then its part no: C00040897, both available direct from Indesit spares dept 0870 9077077 😀
MartinRe: Whirlpool Inner Glass door
Graham,
Wash Vac (Part Center) stock them Part No: 481944238353 around £27 🙂
Martin
Re: Siemans dishwasher – powder not being washed out
Lizzie,
Check that the top and bottom spray arms are not blocked and free to rotate (especially ensure top spray arm doesn’t foul crocks & cutlery)
Clean filters thoroughly and if you still have a problem get back to us but please supply the full model number 😉
Martin
Re: Service Power?
Just thought I would add this link between 2 threads inextricably associated :rotfl:
http://www.ukwhitegoods.co.uk/modules.p … pic&t=4053
Martin
kwatt wrote:but Martin reminded me to tidy up the other night.
:lesson: I just need to keep these young bucks on their toes thats all :rotfl:
kwatt wrote:note the old guy supervising the workers
Indeed so and well observed :martin:
Martin
Re: Spare filter for Whirlpool Tumble Dryer AWG211 needed
The you will need part number 481948058091 fine filter.
Email: – spares@ukwhitegoods.com for further details (copy and paste this to your email though)Martin
Re: Whats the most annoying thing customers do?
You arrive at a call, customer says its not spinning 🙁 she leaves you to get on and fix it 😀 Half an hour later you have sorted it, stuck new brushes in, put it back and its spinning away merrily :tup:
….customer dashes into the kitchen and says… “Did you manage to find out what was wrong with it then?” :con:
… John Cleese once said “…were you born a genius or do you work for The Ministry of Stating the Bl**ding Obvious?” :lol2:
Martin
Re: DASA progress?
Oldlonely1 wrote:iv’e tried their website link but no connection?
It should work, I’ve just tried it for you, it’s a bit slow but hey 🙂
a more direct answer to your question would come possibly if you email them on: –
Martin
Re: Who sold you this then?…John Cleese
As I was saying to all my colleagues on UKW……” Goosegreen is a decent sort, I wonder if he can help us out on this one………..?”
Martin
Re: Who sold you this then?…John Cleese
I’m fully aware Clive of this and that’s why I posed the question…Cheers mate but I’m a little shy on dollars right now, but HAVE A NICE DAY anyway :rotfl:
Martin
dpm wrote:Are the motors single phase or three phase, and does anyone know how similar the latest Zanussis with induction drive are?
Questions, questions, questions?
If only we had the tech info from Indesit eh? …None of us would need to ask the questions in the first place 🙁
Martin
Re: Reasonable Delay?
dmanicolo wrote:Is it actually possible to speak to someone at Merloni?
Dan,
A little patience is called for here after all you’re well in front having them agree a replacement. 😀
It is always the suppling retailer that has a direct responsibility to you the consumer and NOT the manufacturer!
The logistics of dealing with what appears to you as a simple replacement often is not quite so easy for any manufacturer, and indeed is a very costly transaction for them 🙄
Martin
Centurion wrote:So, what was the ‘fix’. I’ve got the exact same problem.
I guess we will never be sure 🙁 But I am 95{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain if you have the same fault, then the element is the likely cause.(Especially if you haven’t been putting salt in the softener) Time to call in an engineer…see our repairs@ for a local contact.
Martin
Re: hotpoint tdl 60
Mowerman,
Then its likely the circuit board is the problem 😕
The live supply comes from the door switch to the circuit board the through the exhaust stat before it reaches the element. Therefore by that reckoning, if you have no live feed to the exhaust stat yet there is to the circuit board, that confirms it!!!
Martin
