Forum Replies Created
-
AuthorPosts
-
Martin
ParticipantRe: Siemens oven – maximum temperature?
Amanensia wrote: I’d got it in my head that there was some sort of mandated limit for consumer equipment of around 240C.
The only mandate being that 240 degrees Celsius is classed as ‘Very Hot!’ All types of (cooking/roasting/baking) wouldn’t need to go higher before smoke and fire takes over. 😉
Martin
ParticipantRe: Siemens oven – maximum temperature?
A fan oven’s maximum temperature is 240c. But a ‘multifunctional’ oven can achieve 300c +
Martin
ParticipantRe: Hotpoint WMAL 641 – is the heater working?
Yes, the heater most likely is faulty.
February 3, 2018 at 8:29 am in reply to: How to stop Hotpoint WDXD8640P from beeping all the time? #453632Martin
ParticipantRe: How to stop Hotpoint WDXD8640P from beeping all the time
Press and hold the CHILD LOCK button for 2 seconds.
Martin
ParticipantRe: zanussi z929t pump
PMP50
Martin
ParticipantRe: Liquidation
…..”every cloud has a silver lining!” 😀
Martin
ParticipantRe: New Vacuum Cleaner design – College Project
Dyson has pushed the design, power and efficiency of the vacuum cleaner to the limit with just one exception. Their cordless units need to include detachable power packs. My Dyson V6 is a pain in the proverbial when the battery dies halfway cleaning the car. 😡
Martin
ParticipantRe: Do Zanussi still do Jetsystem washing machines?
No they scrapped the ‘Jetsystem’ a few years back. It involved having an additional pump and extra internal plumbing that equates to it being too costly.
The majority of Zanussi washing machines a made in their factory in Spolka Poland.
Martin
ParticipantRe: Bosch Wvd24520gb/03
……bearing in mind that’s only if the key symbol is showing on the display. 😉
0.01 left in the time counter relates to either just 1 minute remaining OR it’s timed-out.
Martin
ParticipantRe: Bosch Wvd24520gb/03
Have you meggered the machine? Earth leak, especially dryer heater, could be the issue?
Martin
ParticipantRe: NEFF R8580X1GB condenser dryer
As you can see from the exploded parts diagram on the Neff website there’s a front duct NTC and a rear heater NTC 😉
The front NTC (00613753) a likely suspect.
Martin
ParticipantRe: Bosch SMV65M00GB/44 Dishwasher
Moulded mains lead faulty?
Martin
ParticipantRe: Miele Honeycomb Care T4163 not heating up
If the vent hosepipe goes upwards then it could well be condensation draining back into the dryer.
Martin
ParticipantRe: John Lewis JLWM1204 washing machine
Welded Drum used on this gem (part no 3484164508). Just a few coppers change out of 190 quid. 🙁
Martin
ParticipantRe: Bosch Classixx 1200 Express Drum not rotating
That then, more or less, confirms the motor should work and that the problem is the connection to it. Check the connector lead.
-
AuthorPosts
